During the last years, the scientific and industrial community has focused on the astonishing
properties of Fe–Mn–Al–C steels. These high advanced steels allow high-density reductions …

This article reviews the current state of the art in understanding manganese steels. The
standard manganese steel (Hadfield's Manganese) has roughly 12% manganese and 1.2 …

In Chap. 3, the relationships between microstructure and properties of dual-phase steels
were considered. These relationships serve as the foundation of “microstructure design” for …

Corrosion of TWIP austenitic steels Fe-Mn-3Al-3Si was studied using polarization curves,
EIS tests and XPS. Results indicated that increased concentrations of Mn were detrimental …

The effect of Cu alloying on hydrogen embrittlement (HE) in TWIP steel was studied using
the low-speed linearly increasing stress test (LIST) with simultaneous cathodic hydrogen …

The hydrogen embrittlement sensitivity of three twinning-induced plasticity steels is
investigated. A reference TWIP steel (18Mn-0.6 C) is compared to an aluminium added …

Deriving the kinetic reaction constants associated with hydrogen diffusion and trap** in
metals from thermal desorption mass spectroscopy (TDS) spectra proves to be complicated …

We investigate an electrolytic route for hydrogen charging of metals and its detection in Atom
Probe Tomography (APT) experiments. We charge an austenitic Fe-30Mn-8Al-1.2 C (wt.%) …

The role of alloying elements on the hydrogen embrittlement (HE) susceptibility of a Fe–
18Mn–0.6 C alloy was investigated by in situ tensile tests and characterized by the ductility …

The corrosion behavior of austenitic Fe–Mn–Al–Cr–C twinning-induced plasticity (TWIP) and
microband-induced plasticity (MBIP) steels with different alloying elements ranging from …