Wrought austenitic stainless steels are widely used in high temperature applications. This
short review discusses initially the processing of this class of steels, with emphasis on …

Localized plastic deformation has been observed to render nuclear reactor components
more susceptible to stress corrosion cracking (SCC). However, it is not fully clear how …

There is a need for high-throughput, scale-relevant, and direct electrochemical analysis to
understand the corrosion behavior and sensitivity of nuclear materials that are exposed to …

To clarify the deformation behaviors and mechanism of various kinds of inclusions in type
430 stainless steel during hot rolling, isothermal compression experiments using Gleeble …

The mechanical properties and deformation microstructure of cast 304 Cu-containing
austenitic stainless steel at 10− 3/s strain rate in the range of 700~ 1200° C were studied by …

The present study elaborately discussed the effect of grain boundary precipitation and delta
(δ) ferrite formation on surface defects of low nickel austenitic stainless steels. Several …

The effect of alloy segregation and delta (δ) ferrite contents on surface cracking of three
standard (ie AISI 304L, AISI 310S and AISI 321) and two low nickel (ie LNi-1 and LNi-0.3) …

This investigation aims to analyze the effect of homogenization heat treatment at 1240° C for
2 and 6 h on the hardness, distribution, morphology, and chemical composition of the δ …

In order to further expand the application scope of 2205 duplex stainless steel (DSS), its
microstructure and mechanical properties require as much attention as its corrosion …

Four different AISI 304L austenitic stainless steels with chromium equivalent-to-nickel
equivalent (Cr eq/Ni eq) ratios of 1.57, 1.59, 1.62, and 1.81 were chosen for this study. The …