This article provides a review of the research progress on SiC particle-reinforced metal
matrix composites (MMCs), which are a novel type of structural material known for their high …

The isothermal compressive tests with strain rates of (0.001–1) s− 1 and deformation
temperatures of (920–1040)° C were conducted to study the high-temperature deformation …

Hot compression experiments are performed to study the flow characteristics of a
homogenized Sr-modified Al-Si-Mg alloy at the temperatures of 300–420° C and strain rates …

In this study, the hybrid aluminum matrix composite reinforced with TiB 2 and TiAl 3 particles
was fabricated by in situ synthesis. Hot compression tests were performed at a deformation …

The hot compression tests of hybrid aluminum-matrix composites reinforced with micro-SiC
and nano-TiB 2 were performed at deformation temperature of 350–500° C and strain rates …

The strain hardening effect and dynamic recovery behavior of a Ni-based superalloy are
studied by isothermal compressive tests. A new unified dislocation-density based …

Hot deformation behaviors of two pre-treated nickel-based superalloys are investigated over
wide ranges of strain rate and temperature. Based on the theory of dynamic material model …

Particle reinforcement has been considered as the new technological advancement in terms
of fabricating metal matrix composites (MMCs). There are different kinds of techniques that …

The hot deformation behavior of powder metallurgy-processed 8009Al alloys reinforced with
15% SiC particles (8009Al/SiC p composites) was investigated by compression testing at …

In this study, SiC/AA6061 composites with different SiC volume fractions (5%, 10%, 15% and
20%) were fabricated by spark plasma sintering. The deformation behaviour of the …