Hopkinson bar loaded fracture experimental technique: a critical review of dynamic fracture toughness tests
F Jiang, KS Vecchio - 2009 - asmedigitalcollection.asme.org
Hopkinson bar experimental techniques have been extensively employed to investigate the
mechanical response and fracture behavior of engineering materials under high rate …
mechanical response and fracture behavior of engineering materials under high rate …
Review of experimental techniques for high rate deformation and shock studies
JE Field, SM Walley, WG Proud, HT Goldrein… - International journal of …, 2004 - Elsevier
A variety of techniques used to obtain the mechanical properties of materials at high rates of
strain (⩾ 10s− 1) are summarised. These include dropweight machines, split Hopkinson …
strain (⩾ 10s− 1) are summarised. These include dropweight machines, split Hopkinson …
[책][B] Dynamic fracture
K Ravi-Chandar - 2004 - books.google.com
Dynamic fracture in solids has attracted much attention for over a century from engineers as
well as physicists due both to its technological interest and to inherent scientific curiosity …
well as physicists due both to its technological interest and to inherent scientific curiosity …
Measurement of transient deformations using digital image correlation method and high-speed photography: application to dynamic fracture
The digital image correlation method is extended to the study of transient deformations such
as the one associated with a rapid growth of cracks in materials. A newly introduced rotating …
as the one associated with a rapid growth of cracks in materials. A newly introduced rotating …
Compositionally graded materials with cracks normal to the elastic gradient
CE Rousseau, HV Tippur - Acta Materialia, 2000 - Elsevier
Mixed-mode crack tip deformations and fracture parameters in glass-filled epoxy beams with
cracks normal to the elastic gradient are studied. Crack tip fields are optically measured for …
cracks normal to the elastic gradient are studied. Crack tip fields are optically measured for …
Dynamic shear bands: an investigation using high speed optical and infrared diagnostics
This paper presents an experimental investigation of the initiation and propagation
characteristics of dynamic shear bands in C300 maraging steel. Pre-fatigued single edge …
characteristics of dynamic shear bands in C300 maraging steel. Pre-fatigued single edge …
New methods of fabricating gratings for deformation measurements: A review
X Dai, H ** of crack tip deformations using the methods of transmission and reflection coherent gradient sensing: a study of crack tip K-dominance
A new full field optical technique-'Coherent Gradient Sensing'(CGS)-is developed and used
to study crack tip deformations in transparent as well as opaque solids. A first order …
to study crack tip deformations in transparent as well as opaque solids. A first order …
Full Three‐dimensional strain measurements on wood exposed to three‐point bending: analysis by use of digital volume correlation applied to synchrotron radiation …
A microscale three‐point bend experiment on wood has been carried out. The full 3D strain
field of the microscale wood structure has been determined by use of digital volume …
field of the microscale wood structure has been determined by use of digital volume …
Three dimensional cohesive-element analysis and experiments of dynamic fracture in C300 steel
The dynamic drop-weight test is taken as a convenient basis for assessing the fidelity and
predictive ability of cohesive models of fracture in applications involving dynamic crack …
predictive ability of cohesive models of fracture in applications involving dynamic crack …