This article presents an overview of the developments in stainless steels made since the
1990s. Some of the new applications that involve the use of stainless steel are also …

Corrosion induced by chlorine during biomass combustion is a major drawback to the
consolidation of this technology. The current literature brings valuable information on these …

Strength and ductility are two of the most important mechanical properties for a metal, but
often trade off with each other. Here, we report a 316L stainless steel with superior …

In the top-down approach to tailor the microstructures of materials via plastic deformation,
the strain rate plays a significant role. This paper systematically investigates the deformation …

The microstructure, mechanical properties and deformation mechanisms of the 304L
stainless steel (SS) additively manufactured by selective laser melting (SLM) were …

The present work deals with achieving improvement in the mechanical properties of
SUS304L stainless steel through the application of a unique microstructure design termed …

Friction stir processing was used to refine the grain structure in 2 mm thick AISI 316L
stainless steel sheets, with a pinless tool, at a constant traverse speed of 63 mm/min and …

In the present study, a 304 stainless steel was deformed at different temperatures of room
temperature (cold rolling) and 200° C (warm rolling) for elucidating the distinct deformation …

An ideal ultrafine-grained (UFG) microstructure for high strength and high ductility should
have short dislocation-slip path to impede dislocation slip and very low dislocation density to …