4340 steel bars were austenitized at 850° C for 1h followed by heating at 700° C for 90min
and quenching into a salt bath at the temperature range of 300–450° C for 1h to obtain dual …

In this study, corrosion fatigue (CF) behaviour of E690 steel and simulated heat-affected
zone (HAZ) microstructures were investigated in a SO 2-polluted marine atmosphere …

This study aims at evaluating the effect of microstructure imperfections on the corrosion
fatigue performance of an ER70S-6 alloy produced by wire arc additive manufacturing …

The effects of the mechanical properties of the martensite phase on the failure mode and
ductility of dual-phase (DP) steels are investigated using a micromechanics-based finite …

Fatigue crack growth behaviors of cold-rolled dual phase steels with different
microstructures were investigated at room temperature. The ferrite–martensite dual-phase …

The crack growth behaviours of E690 steel and HAZ microstructures under cathodic
potential in artificial seawater were investigated and compared. The crack growth …

The effect of various multiphase microstructures on the fatigue properties of intercritical
annealing, quenching and partitioning (I&Q&P) steel, transformation-induced plasticity …

Fatigue life and fatigue crack growth behaviour of friction stir welded AISI 409M grade ferritic
stainless steel joints in comparison with the base metal was studied. The fatigue life and …

Low cycle fatigue behavior and failure mechanism of a dual-phase steel was investigated by
using LCF tests, interrupted LCF tests, SEM, TEM and XRD peak broadening. LCF tests …

This paper presents the assessment of fatigue crack growth rate for dual-phase steel under
spectrum loading based on entropy generation. According to the second law of …