Metasurface-driven optically variable devices
Optically variable devices (OVDs) are in tremendous demand as optical indicators against
the increasing threat of counterfeiting. Conventional OVDs are exposed to the danger of …
the increasing threat of counterfeiting. Conventional OVDs are exposed to the danger of …
Antennas for light
Optical antennas are devices that convert freely propagating optical radiation into localized
energy, and vice versa. They enable the control and manipulation of optical fields at the …
energy, and vice versa. They enable the control and manipulation of optical fields at the …
Metal–insulator–metal diodes: A potential high frequency rectifier for rectenna application
Abstract Metal–insulator–metal (MIM) diodes are among the most promising candidates for
applications in the high frequency regime. Owing to the tunneling dominant current …
applications in the high frequency regime. Owing to the tunneling dominant current …
Applicability of metal/insulator/metal (MIM) diodes to solar rectennas
The current-voltage (IV) characteristics of metal/insulator/metal (MIM) diodes illuminated at
optical frequencies are modeled using a semiclassical approach that accounts for the …
optical frequencies are modeled using a semiclassical approach that accounts for the …
Performance Optimization of Antenna-Coupled Tunnel Diode Infrared Detectors
JA Bean, A Weeks, GD Boreman - IEEE Journal of Quantum …, 2010 - ieeexplore.ieee.org
Signal-to-noise ratio (SNR) is a valuable figure of merit in determining the operating scope
of infrared detectors. Antenna-couple metal-oxide-metal diodes have been shown to detect …
of infrared detectors. Antenna-couple metal-oxide-metal diodes have been shown to detect …
Advancing MIM electronics: Amorphous metal electrodes
EW Cowell III, N Alimardani, CC Knutson… - Advanced …, 2011 - search.proquest.com
131 Effectively controlling quantum mechanical tunneling through an ultrathin dielectric
represents a fundamental materials challenge in the quest for high-performance …
represents a fundamental materials challenge in the quest for high-performance …
Optical rectification through an Al2O3 based MIM passive rectenna at 28.3 THz
Harevesting energy from waste heat which fluctuates between, approximately, 250 K and
1500 K, ie, peaking at 2–11 μm, could be a game changer in terms of tap** on to …
1500 K, ie, peaking at 2–11 μm, could be a game changer in terms of tap** on to …
Quantum‐Tunneling Metal‐Insulator‐Metal Diodes Made by Rapid Atmospheric Pressure Chemical Vapor Deposition
A quantum‐tunneling metal‐insulator‐metal (MIM) diode is fabricated by atmospheric
pressure chemical vapor deposition (AP‐CVD) for the first time. This scalable method is …
pressure chemical vapor deposition (AP‐CVD) for the first time. This scalable method is …
Demonstration of resonant tunneling effects in metal-double-insulator-metal (MI2M) diodes
Although the effect of resonant tunneling in metal-double-insulator-metal (MI2M) diodes has
been predicted for over two decades, no experimental demonstrations have been reported …
been predicted for over two decades, no experimental demonstrations have been reported …
Conversion efficiency of broad-band rectennas for solar energy harvesting applications
Optical antennas have been proposed as an alternative option for solar energy harvesting.
In this work the power conversion efficiency of broadband antennas, log-periodic, square …
In this work the power conversion efficiency of broadband antennas, log-periodic, square …