Polyethylene glycol (PEG) is not satisfactory for the removal performance of thiophenic
sulfurs, eg, low S-partition coefficient KN (S). The unsatisfactory KN may be due to relatively …

This study reports the selection of an ideal catalyst–oxidant system for the energy-efficient
catalytic oxidative desulfurization (CODS) of dibenzothiophene (DBT) and denitrogenation …

High levels of sulfur organic compounds (SOCs) and nitrogen organic compounds (NOCs),
which are contaminants present in diesel fuel and straight run gas oil (SRGO), were …

The present research article depicts the adsorptive denitrogenation of indole-containing
model oil using cobalt-incorporated acid-activated carbon (Co-MAC). The active metal …

Adsorptive desulfurization (ADS) of thiophene containing n-octane at low S-concentrations
(≤ 70 ppmw) was performed under dynamic (flow) conditions in a fixed bed of Cu/Ni …

Four economic and easily prepared metal-based ionic liquids (MILs) were synthesized
based on triethylamine hydrochloride (Et3NHCl) and a series of anhydrous metal chlorides …

A commercially available activated carbon was oxidized by concentrated sulfuric acid,
saturated ammonium persulfate solution, and mixed sulfuric acid and ammonium persulfate …

A polyether amine (PEA)-based solvent, which can be synthesized by PEA and formic acid
(FA), is a green, low-cost, and efficient extractant for desulfurization and denitrogenation …

In this study, sulphuric acid‐treated activated alumina (AA) was used for sulphur and
nitrogen removal from model fuel in a batch adsorption study. Dibenzothiophene (DBT), a …

The present study explores the usage of acetic-acid-treated cobalt-modified activated
carbon as an adsorbent material for the adsorptive desulfurization of DBT-containing model …