Titanium alloys have been widely used in many industrial clusters such as automotive,
aerospace and biomedical industries due to their excellent comprehensive properties. In …

Current understanding of the principles underlying the thermomechanical processing (TMP)
of α/β titanium alloys is reviewed. Attention is focused on the formulation of constitutive …

Clusters of α grains with sharp local texture, called macrozones, have been observed in
titanium products and reported to reduce the fatigue performances. This work investigated …

The cooling rate has a strong influence on the volume fraction, size and distribution of
primary α phase of TA15 titanium alloy, which play a decisive role in the properties of the …

The dynamic globularization kinetics of Ti-17 (Ti–5Al–2Sn–2Zr–4Mo–4Cr) alloy with initial
lamellar microstructure over wide temperature (780–860° C) and strain rate ranges (0.001 …

Changing strain path is an effective method to optimize the hot working process and improve
microstructure and mechanical performance of titanium alloys. In this work, dynamic …

The hot working behavior of near-α titanium alloy IMI 834 with a duplex starting
microstructure was studied using the technique of processing map. The processing map was …

Friction stir processing (FSP) was used to locally refine a thin surface layer of the coarse,
fully lamellar microstructure of investment-cast Ti-6Al-4V. Depending on the peak …

The static globularization behavior and mechanism of transformed structure during heat-
treatment of hot worked TA15 alloy were investigated. It is found that boundary splitting and …

Lamellar globularization, a multi-stage and significant microstructure transformation
behavior during primary hot working of titanium alloys, directly affects the microstructure and …