This is a viewpoint paper on recent progress in the understanding of the microstructure–
property relations of advanced high-strength steels (AHSS). These alloys constitute a class …

The application of automated Electron Backscatter Diffraction (EBSD) in the scanning
electron microscope, to the quantitative analysis of grain and subgrain structures is …

Twisted heterostructures of two-dimensional crystals offer almost unlimited scope for the
design of new metamaterials. Here we demonstrate a room temperature ferroelectric …

Electron channelling contrast imaging (ECCI) is a powerful technique for observing crystal
defects, such as dislocations, stacking faults, twins and grain boundaries in the scanning …

We study the kinetics of the substructure evolution and its correspondence to the strain
hardening evolution of an Fe–22wt.% Mn–0.6 wt.% C TWIP steel during tensile deformation …

We present a multiscale dislocation density-based constitutive model for the strain-
hardening behavior in twinning-induced plasticity (TWIP) steels. The approach is a physics …

Encompassing the concepts, practice, and application of orientation analysis, Introduction to
Texture Analysis is an essential reference source for reserachers in textiles. The author uses …

The past decade has seen rapid advances in direct detector technology for electron
microscopy. Direct detectors are now having an impact on a number of techniques in …

We report on the microstructure, texture and deformation mechanisms of a novel ductile lean
duplex stainless steel (Fe–19.9 Cr–0.42 Ni–0.16 N–4.79 Mn–0.11 C–0.46 Cu–0.35 Si …

Formation of shear bands and strain-induced ε-and α′-martensite phases during tensile
deformation of austenitic stainless steels was studied. Stacking fault energies (SFE) of the …