An alloy system based on iron is described in which it has been possible to create a high
density of interfaces by heat treatment alone. The resulting structure consists of a mixture of …

Nanostructured bainitic steels possess ultra-high strength and have been the focus of
extensive research due to their suitability in many demanding engineering applications …

The transformation texture was studied in a Ti–6Al–4V alloy for two microstructures
produced through different phase transformation mechanisms (ie diffusional vs. displacive) …

Nanobainite transformation behavior was comparably studied using in situ neutron
diffraction measurements, scanning electron microscopy and electron backscatter diffraction …

The bainite transformation behavior after plastic deformation of austenite, ie, ausforming was
studied by in situ neutron diffraction and ex situ experiments, and the effects of ausforming …

In order to clarify the relationships among welding heat input, microstructural evolution and
fracture toughness of coarse-grained heat affected zone (CGHAZ) for HSLA steels, the …

A 0.79 C–1.5 Si–1.98 Mn–0.98 Cr–0.24 Mo–1.06 Al–1.58 Co (wt.%) steel was isothermally
heat treated at 200° C for 10days and 350° C for 1day to form a nanoscale bainitic …

The crystallography of martensite formed in 0.2 C-2.0 Mn-1.5 Si-0.6 Cr steel was studied
using the electron backscattered diffraction (EBSD) technique. The results showed that the …

The effect of ausforming on kinetics, morphology and crystallography of nanobainite steel
was examined by electron backscattered diffraction and transmission electron microscopy …

This study aims to elucidate the crystallographic characteristics of bainite transformed in a
temperature range of 200–350° C, where a nanobainitic structure is formed. The …