Dissimilar welds between ferritic and austenitic steels represent a good solution for
exploiting the best performance of stainless steels at high and low temperatures and in …

Advanced welding processes for structural materials are gaining increasing importance for
strategic applications in nuclear, aerospace, automobile, and defence sectors. These …

The dissimilar austenitic stainless steel (AISI316) and low carbon steel (AISI1018) have
been welded without filler metal by CO 2 4 kW laser welding. Then, the effect of Post Weld …

This research article reports the correlation between microstructure, mechanical properties,
and residual stresses of dissimilar weld joints (DWJs) between P92 martensitic steel and …

The present work investigated the microstructural feature, mechanical properties, and
residual stress variation for the dissimilar welded joints (DWJs) of P92 and AISI 304L steel …

The influence of α precipitate morphology on the mechanical properties of additively
manufactured Ti-5Al-5V-5Mo-3Cr (Ti-5553) is evaluated. Initially, Archimedes density …

The 2205/316L dissimilar steel joints were commonly used in offshore construction and
platform, and the corrosion performance of the welds significantly affected the service …

Abstract Effects of hybrid laser-arc welding process parameters on the weld formation of a
dissimilar steel joint were studied. A full penetrated weld with minimum defects was obtained …

Directional heating during metal additive manufacturing promotes the growth of a columnar-
grained microstructure along the building direction with a preferred crystal orientation, which …

In this study, the strength and ductility of a direct energy deposited (DEDed) metastable β Ti-
5Al-5Mo-5 V-3Cr (wt%, Ti-5553) alloy was explored by tuning the formation of various α …