Abstract The Al 2 O 3-40% TiO 2 coating fabricated by plasma spraying on carbon steel
substrate were remelted by laser, and the effect of laser remelting on microstructure and …

A dense clad overlay with chemical inertness was achieved on top of the plasma-sprayed
YSZ thermal barrier coatings by laser in order to protect them from hot-corrosion attack. The …

NiCoCrAlYSiHf coatings prepared by arc ion plating was thermally modified via millisecond
laser technique. The microstructural evolution and oxidation resistance of the coatings …

Commercially available austenic stainless steel substrate was coated with commercially
available, raw Al 2 O 3 powder applied by means of plasma spraying method and then re …

This paper reports on the sliding wear performance of the nanostructured Al2O3–13TiO2,
ZrO2 and the bilayered (ZrO2/Al2O3–13TiO2) coated biomedical Ti–13Nb–13Zr alloy in …

Using Ni60 alloy, C, TiN and Mo mixed powders as the precursor materials, in situ
synthesized Ti (C, N) particles reinforcing Ni-based composite coatings are produced on …

In this study, the (AlTiCrNbTa) O 2 high-entropy ceramic coating was fabricated by laser
cladding with squash presetting. Prior to laser cladding, the atmospheric plasma sprayed …

Nanoparticle growth during laser remelting was studied to provide references for optimizing
technological parameters. The variations of nanoparticle sizes during laser remelting …

In this study, Al 2 O 3–13 wt.% TiO 2 ceramic powders were precoated on the surface of
GH4169 substrate by the squash presetting method. As-preset coatings were clad by a fiber …

Abstract Mg-5.6 Zn-0.5 Zr alloy (ZK60) tends to degrade too rapid for orthopedic application,
in spite of its natural degradation, suitable strength and good biocompatibility. In this study …