The paper presents the effect of flat and thread pin profiles on friction stir welding (FSW) of
6061-T6 aluminium alloy with particle reinforcement. The thread geometry on the tool pin …

The 5083 and 6061 (T6) aluminum (Al) alloys are widely used in transportation industries
and the development of structural designs because of their high toughness and high …

Friction stir welding (FSW) is an alternative method to join aluminum (Al) alloys in a solid-
state condition. However, the coarsening or dissolution of precipitation hardening phases in …

5083 aluminium (Al) alloy materials have extensive structural applications in transportation
industries because of their high strength-to-weight ratio and corrosion resistance. However …

AA6262 and AA5456 alloys are welded through friction stir weld (FSW) with process
parameters of tool speed of 1200 rpm, welding speed of 25 mm/min, and tool angle of 3 …

In this study, continuous multi-pass friction stir welding was used to clad dissimilar AA6061
aluminium (Al) and C2801P copper (Cu) alloy materials. The empirical relationships …

Nowadays, aircraft and spacecraft industries pursue advanced materials with more specific
properties due to increased fuel efficiency and payload. Aluminum-lithium alloy suits such …

In this experimental study, aluminum alloy AA6063 plates are welded with a D2 steel tool
shoulder and an HSS tool pin. Three-pin profiles were used to examine the optimum …

Sound weld joints of similar AA2024 aluminum alloy plates of 6 mm were achieved
unprecedentedly at different rotational (386-1216 rpm) and traverse speeds (13-90 mm/min) …

The 5083 and 6061 (T6) aluminum (Al) alloys are widely used in transportation industries
and the development of structural designs because of their high toughness and high …