A review of reported data on the crystal structure, synthesis, and properties of boron
suboxide B 6 O, which is a superhard material (hardness of up to 55 GPa, as measured in …

Dense ceramic materials of silicon carbide with high mechanical properties are obtained by
reaction sintering. The effect of different dispersed compositions of silicon carbide powders …

In this paper, dense ceramic materials based on silicon carbide have been obtained by the
method of reactive sintering with a high level of mechanical properties, used as friction units …

Ceramic materials based on B4C–SiC are obtained by using the method of hot slip casting
followed by reaction sintering (impregnation with liquid silicon). Composite ceramic samples …

This research analyzes the methods for producing silicon nitride and the properties of initial
powders. The main methods for obtaining materials based on silicon nitride are described …

A promising method for obtaining a SiC-based ceramic construction material for products of
complex geometry has been developed. It is suggested to carry out mechanical processing …

Considers the chemistry of carbides of zirconium, hafnium and tantalum and their high
temperature properties. By hot pressing the obtained dense materials in the systems ZrC …

Получен композиционный материал на основе системы B4C‒SiC с разным
содержанием исходного углерода методом реакционного спекания (пропитки жидким …

Методом горячего шликерного литья с последующим реакционным спеканием
(пропиткой жидким кремнием) получены керамические материалы на основе B 4 C …

The change in the abrasive resistance under testing composites based on an epoxy matrix
filled with sludge originating from cutting tool sharpening exhibits the same character for all …