[HTML][HTML] Recent developments on corrosion behaviors of Mg alloys with stacking fault or long period stacking ordered structures
Y Nie, J Dai, X Li, X Zhang - Journal of Magnesium and Alloys, 2021 - Elsevier
Corrosion is one of the most drawbacks which restricts the wide applications of Mg alloys. In
the last decade, the corrosion behaviors of Mg alloys with stacking fault (SF) and/or long …
the last decade, the corrosion behaviors of Mg alloys with stacking fault (SF) and/or long …
Strength-ductility synergy in Mg98. 3Y1. 3Ni0. 4 alloy processed by high temperature homogenization and rolling
Abstract A new Mg 98.3 Y 1.3 Ni 0.4 alloy containing long period stacking ordered (LPSO)
phases with good strength-ductility synergy was prepared by high temperature …
phases with good strength-ductility synergy was prepared by high temperature …
Microstructure evolution and mechanical properties of a high-strength Mg-10Gd-3Y–1Zn-0.4 Zr alloy fabricated by laser powder bed fusion
Q Deng, Y Wu, Q Wu, Y Xue, Y Zhang, L Peng… - Additive …, 2022 - Elsevier
A high-strength Mg-10Gd-3Y–1Zn-0.4 Zr (GWZ1031K, wt%) alloy was prepared by laser
powder bed fusion (LPBF), and the microstructure and mechanical properties of the as built …
powder bed fusion (LPBF), and the microstructure and mechanical properties of the as built …
Preparation of ultra-high strength Mg-Gd-Y-Zn-Zr alloy by pre-ageing treatment prior to extrusion
J Zheng, Z Chen, Z Yan, Z Zhang, Q Wang… - Journal of Alloys and …, 2022 - Elsevier
In this paper, the effect of pre-ageing treatment on the mechanical properties, microstructure,
and fracture behavior of the extruded Mg-9.5 Gd-4Y-2.2 Zn-0.5 Zr (wt%) alloys was studied …
and fracture behavior of the extruded Mg-9.5 Gd-4Y-2.2 Zn-0.5 Zr (wt%) alloys was studied …
Effects of heat treatment before extrusion on dynamic recrystallization behavior, texture and mechanical properties of as-extruded Mg-Gd-Y-Zn-Zr alloy
M Li, Y Huang, Y Liu, X Wang, Z Wang - Materials Science and …, 2022 - Elsevier
The effects of heat treatment before extrusion on the dynamic recrystallization (DRX)
behavior, texture, and mechanical properties of the extruded Mg-9.8 Gd-3.5 Y-2.0 Zn-0.4 Zr …
behavior, texture, and mechanical properties of the extruded Mg-9.8 Gd-3.5 Y-2.0 Zn-0.4 Zr …
Influence of friction stir processing and aging heat treatment on microstructure and mechanical properties of selective laser melted Mg-Gd-Zr alloy
The low ductility of Mg alloy fabricated by selective laser melting (SLM) technique usually
restricts its application in several fields. Friction stir processing (FSP) is a promising post …
restricts its application in several fields. Friction stir processing (FSP) is a promising post …
Tailoring microstructural evolution and fracture damage behavior of a Mg–Y–Zn alloy during hot tensile deformation
X Chen, Y Lu, M Ning, X Zhou, J Chen - Materials Science and …, 2023 - Elsevier
Hot tensile tests are employed herein to explore the microstructural evolution and fracture
damage of a hot–extruded Mg-9.1 Y-1.8 Zn (wt%) alloy at deformation temperatures of 250 …
damage of a hot–extruded Mg-9.1 Y-1.8 Zn (wt%) alloy at deformation temperatures of 250 …
Synergic effects of Gd and Y contents on the age-hardening response and elevated-temperature mechanical properties of extruded Mg–Gd (-Y)-Zn-Mn alloys
N Su, Y Wu, Q Deng, Z Chang, Q Wu, Y Xue… - Materials Science and …, 2021 - Elsevier
This paper investigated the effects of Gd and Y solutes on aging behaviour and
corresponding mechanical properties of the extruded Mg–Gd (-Y)-Zn-Mn alloys at room and …
corresponding mechanical properties of the extruded Mg–Gd (-Y)-Zn-Mn alloys at room and …
Optimization in strength-ductility of heterogeneous Mg-13Gd alloy via small extrusion ratio combined with pre-aging
In this work, the extruded Mg-13Gd alloy sheet was fabricated by hot extrusion with small
extrusion ratio of 3.9 (ER3. 9) combined with the aging prior to extrusion (APE) treatment …
extrusion ratio of 3.9 (ER3. 9) combined with the aging prior to extrusion (APE) treatment …