In order to expand the direct current-cold metal transfer (DC-CMT) method to include large-
thickness plate welding, a tungsten inert gas–CMT (TIG–CMT) hybrid welding process was …

A recurring obstacle encountered during welding which dictates the weld quality is the
management of input process restrictions. Thorough selection of input welding restrictions is …

Through collecting, sorting, and analysing the research data of tungsten inert gas (TIG)
welding in China and abroad, the modified TIG welding and ways to realise the …

The influence of electrode relative position and TIG current variation on arc stability and
weld formation of TIG-MIG hybrid welding were studied comparing with that of conventional …

In order to investigate the multi-coupling transport phenomena in TIG-MIG hybrid arc
welding, a three-dimensional model including droplet and molten pool was established. An …

TIG-MIG hybrid welding produces better weld formation than traditional MIG welding at
higher welding speeds. The adaptive heat source and arc pressure models of inclined TIG …

Plates of 6061-T6 aluminum alloy of 6.35 mm thick were welded by using the hybrid gas
tungsten arc-gas metal arc welding process (GTAW-GMAW) and compare with the …

To solve the lack of sidewalls penetration in gas metal arc welding (GMAW), a swing TIG-
MIG hybrid welding method was proposed and applied in the narrow gap welding. The arc …

Considering the problem of the weak bonding interface structure between the rolling mill oil
and film bearing bushings of Babbitt alloy and steel substrate, a numerical simulation of the …

Weldability of duplex stainless steel (DSS) is an important issue in fabrication of pipes at
petrochemical industries. Well-established tungsten inert gas (TIG) welding process has the …