In this contemporary era, due to the growth of the world's population, fast progress of modern
industries all over the world and comprehensible limitation of the world's freshwater reserves …

Electrodeposition of Zn–Ni coatings performed in acidic baths are not suitable for high
strength steels due to their high susceptibility to hydrogen embrittlement. In this work, Zn–Ni …

In this work, Ni–Co–SiC composite coatings were prepared by pulse current (PC)
electrodeposition on carbon steel. Effects of the electrodepositing parameters such as duty …

Zn–Mn alloys were electrodeposited from an acidic chloride bath. The influence of bath
composition and deposition parameters on the alloys' composition, cathodic current …

NiCo alloy coatings were galvanostatically electrodeposited at room temperature from
sulfate bath using saccharin (0 to 12 g L− 1) as an additive agent. These alloy coatings were …

Abstract The zinc (Zn) and Zn/graphene oxide (Zn/GO) composite coatings on the mild steel
were fabricated by direct current electrodeposition from an acidic chloride bath without GO …

Zinc-nickel alloys with 8-15% nickel were deposited onto stainless steel for corrosion
protection. Alkaline deposition conditions were utilized given that alkaline systems have …

A phosphate–permanganate conversion coating was applied as the pretreatment process
for AZ91D magnesium alloy substrate. Zn–Ni alloys were electrodeposited onto the treated …

Abstract Zn-Ni-Fe co-deposits were obtained on a low carbon steel with and without
ascorbic acid (AA) in solution and compared to Zn-Ni by electrochemical experiments. After …

Zinc-nickel γ-phase alloy coatings were electrochemically deposited from a borate
electrolytic bath on stainless steel substrates as protective coatings for corrosive …