During elevated-temperature thermomechanical processing, the occurrence of
recrystallization during straining is known as dynamic recrystallization (DRX), which usually …

Magnesium alloys are of considerable current interest for use as degradable implants due to
their unique properties including biodegradability, biocompatibility, low density and …

In-depth knowledge of the coupling between grain refinement and the transformation-
induced plasticity (TRIP) effect in metastable alloys is a viable approach for the improvement …

Room-temperature (RT) formability is a key factor to broaden the applications of rolled Mg
alloy sheets in the industry. However, rolled Mg alloy sheets generally form strong basal …

Shot peening is an efficient post-processing technique for eliminating surface manufacturing
defects, inducing compressive residual stress, and improving the mechanical properties of …

Abstract Models for grain size dependence of flow stress typically ignore contributions from
geometrically necessary dislocations (GNDs) in the grain boundary regions. Ashby had …

The capability for synergistic advancements in both making and sha** afforded by
additive manufacturing (AM) enables the flexible production of high-performance …

Grain size effects on the early plastic strain localization and slip transfer at grain boundaries
were investigated for the Alloy 718 Ni-based superalloy at 650° C. Three microstructures …

The effect of large pre-deformation on the microstructural evolution and mechanical property
anisotropy of large-sized Al-Zn-Mg alloy extruded profiles with thin-walls and high-ribs was …

Grain size and aging state are the two major microstructural factors affecting the mechanical
properties of Al alloys. In this study, fatigue tests were conducted on 7075 Al alloy with …