Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
Electrostatic sensors–Their principles and applications
Over the past three decades electrostatic sensors have been proposed, developed and
utilised for the continuous monitoring and measurement of a range of industrial processes …
utilised for the continuous monitoring and measurement of a range of industrial processes …
[HTML][HTML] The lean blowout prediction techniques in lean premixed gas turbine: An overview
The lean blowout is the most critical issue in lean premixed gas turbine combustion.
Decades of research into LBO prediction methods have yielded promising results …
Decades of research into LBO prediction methods have yielded promising results …
Frequency-division multiplexing and main peak scanning WMS method for TDLAS tomography in flame monitoring
A Huang, Z Cao, W Zhao, H Zhang… - IEEE Transactions on …, 2020 - ieeexplore.ieee.org
The wavelength modulation spectroscopy (WMS) method is typically used in the tunable
diode laser absorption spectroscopy (TDLAS) for spectrum extraction in a noisy background …
diode laser absorption spectroscopy (TDLAS) for spectrum extraction in a noisy background …
A high-speed digital electrical capacitance tomography system combining digital recursive demodulation and parallel capacitance measurement
Two means can be used to improve the data acquisition rate of the electrical capacitance
tomography (ECT) system with a fixed excitation frequency, ie, improving the capacitance …
tomography (ECT) system with a fixed excitation frequency, ie, improving the capacitance …
Supervised learning-based multi-site lean blowout prediction for dry low emission gas turbine
Current dry low emission (DLE) gas turbines have extremely low nitrogen oxides (NOx)
emissions, allowing them to comply with stringent environmental regulations. The ultra-low …
emissions, allowing them to comply with stringent environmental regulations. The ultra-low …
Estimation of combustion temperature field from the electrical admittivity distribution obtained by electrical tomography
Measurement of combustion temperature field is essential for combustion diagnosis. As
intrusive devices for temperature measurement interfere the flow field of flame, nonintrusive …
intrusive devices for temperature measurement interfere the flow field of flame, nonintrusive …
Dual-modality electrical tomography for flame monitoring
Electrical capacitance tomography has been widely used in flame monitoring. In this paper,
a dual-modality electrical tomography system was developed for imaging of flame admittivity …
a dual-modality electrical tomography system was developed for imaging of flame admittivity …
Bias-immune absorption spectrum extraction by downsampling the wavelength modulation laser signal for precise measurement of dynamic gas temperature
Precise and bias-immune absorption spectrum was directly extracted from wavelength-
modulated intensities for dynamic gas temperatures by a proposed novel downsampling …
modulated intensities for dynamic gas temperatures by a proposed novel downsampling …
Detection and classification of lean blow-out and thermoacoustic instability in turbulent combustors
Lean blow-out (LBO) and thermoacoustic instability (TAI) are common undesirable
occurrences in modern lean-burn turbulent combustion systems, such as fossil-fuel furnaces …
occurrences in modern lean-burn turbulent combustion systems, such as fossil-fuel furnaces …
Lean blowout detection for bluff-body stabilized flame
The present work proposed an index to extend the previous lean blowout detection method
to bluff-body stabilized flame at the condition of low Reynolds number. Dynamic …
to bluff-body stabilized flame at the condition of low Reynolds number. Dynamic …