Thermoset fiber reinforced composites, widely used in current structural applications, have
complex repair procedures and generates significant amounts of scrap due to its recycling …

This analysis investigates short thin-walled channel-section columns made of CFRP
laminate. Columns with four multi-ply composite layups were tested, each layup having 8 …

The study investigated short, thin-walled Z-shaped carbon-epoxy laminate columns. Two
multi-layer composite lay-up configurations were tested [0/45/-45/90] s and [90/-45/45/0] s …

Fiber-reinforced composite structures are used in different applications due to their excellent
strength to weight ratio. Due to cost and tool handling issues in conventional manufacturing …

This study investigated short thin-walled channel columns made of carbon/epoxy laminate.
Columns with two multi-ply composite layups [0/45/− 45/90] s and [90/− 45/45/0] s were …

In this study, the thin-walled plate with the central open hole made of carbon-epoxy
composite was investigated. The plate was tested in tension to investigate the mechanism of …

The study investigated short, thin-walled Z-shaped carbon–epoxy laminate columns. Z-
columns were compressed while considering the eccentric force realized from the center of …

The paper deals with experimental and numerical analysis of end-notched flexure (ENF) test
of GRFP unidirectional laminates. The numerical analyses were performed in the ANSYS® …

The subject of the research was a thin-walled plate weakened by a cut-out, made of carbon-
epoxy laminate, subjected to compression. The study included an analysis of the critical and …

This study investigates the effect of eccentric compressive load on the stability, critical states
and load-carrying capacity of thin-walled composite Z-profiles. Short thin-walled columns …