Precision of ISO 3382-2 and ISO 3382-3–A Round-Robin test in an open-plan office
International standards ISO 3382-2 and ISO 3382-3 are increasingly applied to determine
the room acoustic conditions in open-plan offices because attention to noise control in such …
the room acoustic conditions in open-plan offices because attention to noise control in such …
Time–frequency methods for characterization of room impulse responses and decay time measurement
In the low frequency range, the reverberation of a room should be characterized by the
decay time, which can be determined experimentally by various methods. In order to make …
decay time, which can be determined experimentally by various methods. In order to make …
Experimental evaluations of acoustic properties and long-term analysis of a novel indoor living wall
Indoor living walls are important decorative elements that can recreate a natural garden in
enclosed spaces. Several aspects are addressed by the scientific literature such as, for …
enclosed spaces. Several aspects are addressed by the scientific literature such as, for …
Assessment of the airborne sound insulation from mobility vibration measurements; a hybrid experimental numerical approach
A new measurement procedure is proposed to assess the airborne sound insulation of a
partition under diffuse sound field excitation using mobility measurements combined with a …
partition under diffuse sound field excitation using mobility measurements combined with a …
On the use of dynamic vibration absorbers to counteract the loss of sound insulation due to mass-spring-mass resonance effects in external thermal insulation …
One of the common ways to increase the energy performance of existing buildings is to add
a thermal insulation layer to their façade elements, which in turn is covered by a thin …
a thermal insulation layer to their façade elements, which in turn is covered by a thin …
Uncertainty of facade sound insulation by a Round Robin Test. Evaluations of low-frequency procedure and single numbers
The international standard ISO 140-5 for the measurement of the sound insulation of
building facades has been recently replaced by the new standard ISO 16283-3. The revised …
building facades has been recently replaced by the new standard ISO 16283-3. The revised …
Revision of international standards on field measurements of airborne, impact and facade sound insulation to form the ISO 16283 series
C Hopkins - Building and Environment, 2015 - Elsevier
This paper gives the background to the main technical changes concerning the field
measurement of sound insulation in the new ISO 16283 series of standards for airborne …
measurement of sound insulation in the new ISO 16283 series of standards for airborne …
Experimental evaluation of the sound absorption and insulation of an innovative coating through different testing methods
The Lombardy Region and the Construction Technologies Institute of the National Research
Council of Italy are promoting the development of an innovative coating nano-material for …
Council of Italy are promoting the development of an innovative coating nano-material for …
Uncertainty of façade sound insulation in buildings by a round robin test
The uncertainty of field measurements of a façade was evaluated by a Round Robin Test
(RRT) conducted in a full-scale experimental building at the Construction Technologies …
(RRT) conducted in a full-scale experimental building at the Construction Technologies …
Influence of low frequency bands on airborne and impact sound insulation single numbers for typical Portuguese buildings
J António, D Mateus - Applied Acoustics, 2015 - Elsevier
This paper presents an analysis of in situ measurements for airborne and impact sound
insulation performed in typical buildings in Portugal. The direct partition element separating …
insulation performed in typical buildings in Portugal. The direct partition element separating …