Objectives: From the treatment of damaged teeth to replacing missing teeth, dental
biomaterials cover the scientific interest of many fields. Dental biomaterials are one of the …

Investigation of the temperature distribution law in molten pool during the laser cladding
process and the varying principle of the forming parts' cross section sizes to obtain optimum …

In order to improve the damage tolerance ability of aircraft skin, the superiority of laser
cladding aluminum alloy structures for crack resistance is investigated by establishing a …

Abstract 24CrNiMo low alloy steels were fabricated by selective laser melting (SLM), aiming
at investigating the effect of volumetric energy density (η) on the densification behavior and …

The localized thermal characteristics, solidification parameters and the corresponding
microstructure depend highly on the process parameters in the laser powder-fed additive …

An improved three-dimensional finite element model has been proposed for studying the
thermal behavior and microstructure evolution during laser cladding of AlSi10Mg alloys …

Finite element modeling and simulation of laser powder bed fusion process (L-PBF)
provides physical insight about the laser processing that is often not possible or highly …

ABSTRACT A hierarchical microstructure was obtained, including the unique interlaced dual-
phase structure, the solidified molten pool, the coarse columnar B2 grains and fine equiaxed …

This work aims at depositing single-layer H13 tool steel cladding on a precipitation
hardening copper‑beryllium (CuBe) alloy substrate using direct laser metal deposition …

In this paper, a randomly packed powder-bed model by sequential addition method was
established mathematically and physically to simulate the condition of the interaction …