Active sites play a pivotal role in photo/electrocatalysis, particularly in the transition from
fossil fuels to clean, efficient and renewable energy sources. Precise identification of catalyst …

The Laves phase in the as-built Inconel 718 (IN718) superalloy is known as undesirable
phase, which limits the industrial applications of the manufactured parts. Post-processing in …

Grain boundary engineering (GBE) is considered to be an attractive approach to
microstructure control, which significantly enhances the grain-boundary-related properties of …

This is the first comprehensive study on the development of a cubic crystallographic texture
in pure chromium (Cr) manufactured using laser powder bed fusion (LPBF) with different …

The study investigated the effect of twin boundaries on the microstructure and mechanical
properties of Inconel 625 alloy during hot/cold deformation and subsequent heat treatment …

High temperature oxidation of additively manufactured (Laser-powder bed fusion) IN939
(AM IN939) was studied at 900° C in dry air for 168 hours. AM IN939 cut …

The laser powder bed fusion (LPBF) of pure tungsten for the fabrication of near-fully dense
components is challenging owing to the intrinsic properties of tungsten. In this study, routine …

This study explicates the microstructural evolution and mechanical properties of the Inconel
617 joint, prepared through micro-deformation diffusion bonding. The joints were fabricated …

In the present study, strain-annealing based thermo-mechanical processing was employed
to achieve a grain boundary engineered (GBE) microstructure in an equiatomic …

The oxidation behavior and mechanism of as-received and 30% cold-rolled alumina-forming
austenitic (AFA) steel were investigated in dry air at 700° C. The results show that the mass …