There are several facets of aluminum when it comes to sustainability. While it helps to save
fuel due to its low density, producing it from ores is very energy-intensive. Recycling it shifts …

The deformation responses of NiCoCrFe high-entropy alloy (HEA) under quasi-static (1×
10− 4-1× 10− 1/s) and dynamic (1,000–6,000/s) tension were investigated. A good …

Complex structural components made from 7xxx series alloys are usually manufactured
through hot stam** due to their low ductility at room temperature. With the help of a custom …

In this study, the dynamic compressive response behavior of a body-centered cubic (BCC)
single-phase TiZrNbV refractory high-entropy alloy (RHEA) was investigated under impact at …

Technological metal forming processes involving hot and superplastic deformation are
sensitive to temperature and strain rate. This is because inelasticity mechanisms operate in …

Strain controlled fatigue of P92 steel with various strain hold dwells introduced at the peak
loading point were conducted at 625° C. Two features which depend on the cycle and strain …

Achieving high superplasticity in single-phase Al alloys remains a challenge, since the fine-
grained structure required for superplastic deformation coarsens rapidly in the absence of …

The actual and accurate dynamic constitutive relationship of railway wheel/rail steels is
crucial to availably simulate the wheel-rail impact behavior in service, which has …

The mechanical response and texture evolution of rare-earth-containing magnesium alloy
sheet, ZEK100, are measured under uniaxial (tension and compression) loading along the …

Abstract Portevin-Le Chatelier (PLC) effect often occurs in many alloy systems and leads to
flow stress variations. When precipitation occurs, the PLC behavior changes and its resultant …