Advances in rapid compression machine studies of low-and intermediate-temperature autoignition phenomena
Rapid compression machines (RCMs) are widely used to acquire experimental insights into
fuel autoignition and pollutant formation chemistry, especially at conditions relevant to …
fuel autoignition and pollutant formation chemistry, especially at conditions relevant to …
Plasma-assisted ignition and combustion: nanosecond discharges and development of kinetic mechanisms
SM Starikovskaia - Journal of Physics D: Applied Physics, 2014 - iopscience.iop.org
This review covers the results obtained in the period 2006–2014 in the field of plasma-
assisted combustion, and in particular the results on ignition and combustion triggered or …
assisted combustion, and in particular the results on ignition and combustion triggered or …
A jet fuel surrogate formulated by real fuel properties
An implicit methodology based on chemical group theory to formulate a jet aviation fuel
surrogate by the measurements of several combustion related fuel properties is tested. The …
surrogate by the measurements of several combustion related fuel properties is tested. The …
Laminar flame speeds and ignition delay times of methane–air mixtures at elevated temperatures and pressures
Measurements on laminar flame speeds and ignition delay times of methane/air mixtures at
elevated pressures and temperatures were carried out in a constant volume bomb and …
elevated pressures and temperatures were carried out in a constant volume bomb and …
Comprehensive experimental and simulation study of the ignition delay time characteristics of binary blended methane, ethane, and ethylene over a wide range of …
A comprehensive experimental and kinetic modeling study of the ignition delay time (IDT)
characteristics of some binary blends of C1–C2 gaseous hydrocarbons such as …
characteristics of some binary blends of C1–C2 gaseous hydrocarbons such as …
Oxidation of C1− C5 alkane quinternary natural gas mixtures at high pressures
Rapid compression machine (RCM) and shock-tube facilities have been employed to study
the oxidation of natural gas blends at high pressure and intermediate to high temperatures …
the oxidation of natural gas blends at high pressure and intermediate to high temperatures …
[HTML][HTML] An experimental and kinetic modeling study of the auto-ignition of natural gas blends containing C1–C7 alkanes
Ignition delay time measurements for multi-component natural gas mixtures were carried out
using a rapid compression machine at conditions relevant to gas turbine operation, at …
using a rapid compression machine at conditions relevant to gas turbine operation, at …
n-Butane: Ignition delay measurements at high pressure and detailed chemical kinetic simulations
D Healy, NS Donato, CJ Aul, EL Petersen… - Combustion and …, 2010 - Elsevier
Ignition delay time measurements were recorded at equivalence ratios of 0.3, 0.5, 1, and 2
for n-butane at pressures of approximately 1, 10, 20, 30 and 45atm at temperatures from 690 …
for n-butane at pressures of approximately 1, 10, 20, 30 and 45atm at temperatures from 690 …
A Comprehensive Experimental and Simulation Study of Ignition Delay Time Characteristics of Single Fuel C1–C2 Hydrocarbons over a Wide Range of …
A comprehensive experimental and modeling study of the ignition delay time (IDT)
characteristics of some single prominent C1–C2 hydrocarbons including methane, ethane …
characteristics of some single prominent C1–C2 hydrocarbons including methane, ethane …
On the explosion characteristics of natural gas with hydrogen and inert gas additions
Q Guo, J Liu, W Liang, H Wang - Process Safety and Environmental …, 2023 - Elsevier
In this work, the explosion limits of three different natural gas mixtures (with various
proportions of methane (CH 4), ethane (C 2 H 6), and propane (C 3 H 8)) have been …
proportions of methane (CH 4), ethane (C 2 H 6), and propane (C 3 H 8)) have been …