A simulation study of a Cu (In 1− x Ga x) Se 2 (CIGS) thin film solar cell has been carried out
with maximum efficiency of 24.27%(V oc= 0.856 V, J sc= 33.09 mA/cm 2 and FF= 85.73%) …

Abstract CuSb (S, Se) 2 is emerging as an alternative absorber for thin film photovoltaics, for
its intrinsic p-type conductivity, tunable energy bandgap (1.0÷ 1.6 eV), high absorption …

In this paper we report on the single stage deposition of CuIn x Ga 1− x Se 2 (CIGS)-based
bifacial solar cells on glass coated with Fluorine-doped Tin Oxide (FTO) or Indium Tin Oxide …

This numerical study deals with the CIGS solar cell considering Cd 1-x Zn x S buffer layer.
The composition 'x'of the buffer layer is determined and its impact on the solar cell …

We report on the fabrication and characterization of Cu (In, Ga) Se 2 (CIGS)-based thin film
bifacial solar cells using Al-doped ZnO (AZO) as cost-effective and non-toxic transparent …

Due to poor mechanical properties and brittleness of bioactive glasses, the deposition of
bioactive glass coatings on bioinert metallic implants for bone regeneration is a promising …

Multiferroic materials have attracted significant attention due to their potential to
revolutionize logic and memory devices by reducing energy consumption or increasing …

In this study, we investigated band alignments at CdS/epitaxial CuIn x Ga1–x Se2 (epi-
CIGSe) and epi-CIGSe/GaAs heterointerfaces for solar cell applications using ultraviolet …

This review points out the current need for further research on tandem solar cells as the
commercial single‐junction solar cell technologies report close to their maximum …

The quest for single-stage deposition of CuInGaSe2 (CIGS) is an open race to replace very
effective but capital intensive thin film solar cell manufacturing processes like multiple-stage …