The safety of nuclear power plants has put forward new requirements for the corrosion
resistance of fuel cladding with the advancement of industrialization. FeCrAl alloys are …

This is the first comprehensive study on the development of a cubic crystallographic texture
in pure chromium (Cr) manufactured using laser powder bed fusion (LPBF) with different …

Abstract Effect of shot-peening on the oxidation behaviour of alloy 304HCu in controlled
advanced ultra-supercritical (AUSC) steam at 650◦ C, 31 MPa for 600 h was investigated …

FeCrAl alloy coatings are widely used for their excellent oxidation resistance at high
temperatures, but they can suffer from rapid material degradation due to breakaway …

The corrosion behavior of 316 stainless-steel with a tantalum (Ta-316) coating deposited
using PVD technology was investigated in subcritical environments containing Cl− and Br …

Uneven oxide scale is a common phenomenon in high-temperature corrosion, but the
formation mechanism has not been fully uncovered. A new alumina-forming austenitic (AFA) …

Abstract Model alloy, Fe-20Cr (wt%), was exposed in Ar-(5, 20) H 2 O, Ar-(5, 20) H 2 O-5H 2
and Ar-20O 2 (vol%) at 750 and 850° C. The alloy formed Cr 2 O 3 scales plus Fe-rich oxide …

Alumina-forming β-NiAl coatings were deposited by high velocity oxy-fuel (HVOF) thermal
spraying onto 304 stainless steels for protection against chlorine induced corrosion in a …

Ce-CLAM specimens were exposed to lead-bismuth eutectic (LBE) for 1500 h under 10− 6
wt% oxygen concentration at 500° C. The continuity and integrity of the oxide scale were …

Breakaway oxidation of alloy 304L at 600° C was studied in four environments (O 2+ H 2 O+
KCl, O 2+ H 2 O+ SO 2+ KCl, H 2+ H 2 O+ Ar, O 2+ K 2 CO 3) for up to 168 h. The resulting …