This study aimed to explain the uniaxial compression of T5 heat-treated extruded ZK61
magnesium alloy at the temperatures of 298− 673 K and the strain rates of 0.001− 10 s− 1 …

The effects of different heat treatments on the microstructure and corrosion behavior of an as-
cast ZK60 magnesium alloy were investigated by microscopic analyses, weight loss tests …

The true stress-strain curve of Al-Mg-Si-Cu-Zn alloy under the condition of temperature from
350° C to 500° C and strain rate from 0.01 s− 1 to 10 s− 1 was obtained by Gleeble-3500 …

Abstract A fiber textured,{-1010}<-1-121> dominated component, ultrafine-grained Mg-Zn-Zr
alloy was extruded at a temperature 350° C with extrusion ratio~ 30. The influence of the rise …

In this work, the effects of the microstructure and phase constitution of cast magnesium alloy
ZK60 (Mg-5.8 Zn-0.57 Zr, element concentration in wt.%) on the corrosion behavior in …

AZ31 magnesium alloy has poor plastic deformation ability at room temperature due to its
hexagonal close-packed (HCP) structure. For traditional plastic forming processes, such as …

Multiaxial monotonic and cyclic behaviors of ZK60‐T5 magnesium extrusion are
investigated. Strain‐controlled tests were performed at standard laboratory condition with …

This study evaluates the impact of changing the deformation routes of the extrusion process
in a cross-shaped die (CCE) on the structure and properties of a CuZn36 alloy (% at.) …

Dynamic precipitation of Mg–8.08 Gd–2.41 Sm–0.30 Zr (wt%) alloy during hot compression
was studied in the present work. The effects of temperature and strain rate on dynamic …

In this study, the effect of adding 3 wt.% of light (Ce) and heavy (Y) rare earth elements on
the microstructure and hot compression behavior of Mg-6 wt.% Zn-0.5 wt.% Zr (ZK60) …