The unique combination of very large strains, high temperatures and high strain rates
inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency …

In this study, a new precipitation hardening stainless steel (PHSS), CX stainless steel, was
manufactured using selective laser melting (SLM) technology. Following SLM fabrication, a …

Isothermal compression of a coarse-grained Ti-55531 titanium alloy was carried out in the β
phase region to investigate the hot formability and microstructure evolution of the material. It …

Due to recent increases in the price of Ni, steel use is currently undergoing a global shift
from austenitic stainless steels to ferritic stainless steels. In this study, the corrosion behavior …

In this work, the effect of strain path on the strain distribution, microstructural evolution,
crystallographic texture, and mechanical behavior of electrolytic tough-pitch copper was …

Abstract Al-Mn-Si specimens were severe plastic deformed (SPDed) through constrained
groove pressing (CGP) by ε eff= 1.16, 232, and 3.48. CGPed sheets were subsequently …

Aluminum alloy is today considered as a prime selection for manufacturing lightweight
structural components in the automotive industry to increase fuel efficiency and reduce …

In this paper, a series of novel form-stable phase change materials (PCMs) containing
phosphorus and silica were prepared by transesterification of diethyl phosphite with 1 …

A post-weld heat treatment consisting of solution treatment and subsequent aging (STA) is
widely applied to aluminum joints fabricated by friction stir welding (FSW) to improve the …

The influence of effective strains with a range from 1.1 to 2 on the corrosion resistance of
GH4710 superalloy in chloride solutions was studied by potentiodynamic polarization …