The growing demand for materials with exceptional corrosion resistance and mechanical
properties in the aerospace and ocean industries has led to increased research interest in …

With the increasing demands of economical, reliable and durable hydraulic and pneumatic
systems, it is necessary to minimize the material damage from cavitation erosion (CE) when …

In this work study, a comparative analysis was undertaken to investigate investigation into
the cavitation erosion (CE) and corrosion behavior of laser powder bed fusion (LPBF) TC4 …

Microstructure evolution of the nickel-aluminum bronze alloy was studied by heat treatment,
including annealing, normalizing, quenching and aging. The microstructure was refined and …

Laser surface melting (LSM) was applied on a cast Ni–Al bronze (NAB), which was a crucial
material for marine ship propellers. A 720 μm-thick LSM layer with fine equiaxed and …

Abstract TaC/Stellite X-40 Co-based composite coatings were fabricated on nickel‑
aluminum bronze (NAB) substrates by laser surface cladding (LSC), aiming at improving …

Cavitation erosion significantly impairs the serviceability of hydroelectric turbines and
causes tremendous economic loss. Therefore, the demand for materials with effective …

The high-velocity oxygen-fuel (HVOF) spraying process was used to fabricate conventional
WC–10Co–4Cr coatings and FeCrSiBMn amorphous/nanocrystalline coatings. The …

This work investigated the cavitation erosion performance of two copper alloys in deionized
water (DW) and artificial seawater (ASW) for 10 h. Specifically, scanning electron …

Dependence of the tribocorrosion behaviour of nickel-aluminium bronze (NAB) on load in
artificial seawater was investigated. Results from electrochemical measurements revealed …