Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
[HTML][HTML] Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
There are several facets of aluminum when it comes to sustainability. While it helps to save
fuel due to its low density, producing it from ores is very energy-intensive. Recycling it shifts …
fuel due to its low density, producing it from ores is very energy-intensive. Recycling it shifts …
Influence of injection parameters on the porosity and tensile properties of high-pressure die cast Al-Si alloys: a review
AR Adamane, L Arnberg, E Fiorese, G Timelli… - International journal of …, 2015 - Springer
Aluminum-Silicon alloys are the most extensively used Al foundry alloys and are widely
used in high-pressure die casting (HPDC) of automotive components. Several process …
used in high-pressure die casting (HPDC) of automotive components. Several process …
Effect of heat treatment and Fe content on the microstructure and mechanical properties of die-cast Al–Si–Cu alloys
The effect of solution and ageing heat treatment on the microstructure and mechanical
properties of the die-cast Al–9 wt.% Si–3.5 wt.% Cu alloys containing 0.1–1.0 wt.% Fe was …
properties of the die-cast Al–9 wt.% Si–3.5 wt.% Cu alloys containing 0.1–1.0 wt.% Fe was …
The effects of varying Mg and Si levels on the microstructural inhomogeneity and eutectic Mg2Si morphology in die-cast Al–Mg–Si alloys
The effects of varying Mg and Si levels on the microstructural inhomogeneity and eutectic
Mg 2 Si morphology in die-cast Al–Mg–Si alloys have been investigated. It was found both …
Mg 2 Si morphology in die-cast Al–Mg–Si alloys have been investigated. It was found both …
[HTML][HTML] A high Fe-containing AlSi12 alloy fabricated by laser powder bed fusion
Abstract The high Fe-containing AlSi12 alloy was processed by additive manufacturing of
laser powder bed fusion (LPBF) to understand the features of microstructures and …
laser powder bed fusion (LPBF) to understand the features of microstructures and …
[HTML][HTML] Effects of die-casting defects on the blister formation in high-pressure die-casting aluminum structural components
The following work aims to present the casting defects effect in AlSi10MnMg alloy structural
components on the blister's possibility. Structural components must exhibit high mechanical …
components on the blister's possibility. Structural components must exhibit high mechanical …
Effect of short T6 heat treatment on the microstructure and the mechanical properties of newly developed die-cast Al–Si–Mg–Mn alloys
A short T6 heat treatment for Al–Si–Mg–Mn die-cast alloys was developed with a solution
treatment time of only 10 min at 540° C. Excellent mechanical properties were achieved with …
treatment time of only 10 min at 540° C. Excellent mechanical properties were achieved with …
[HTML][HTML] Microstructure evolution and mechanical properties of new die-cast Al-Si-Mg-Mn alloys
The microstructure evolution and mechanical properties of recently developed die-cast Al-Si-
Mg-Mn alloys were investigated. CALPHAD modelling, based on the thermodynamic …
Mg-Mn alloys were investigated. CALPHAD modelling, based on the thermodynamic …
Development of a high strength Al–Mg2Si–Mg–Zn based alloy for high pressure die casting
A high strength Al–Mg 2 Si–Mg–Zn based alloy has been developed for the application in
high pressure die casting to provide improved mechanical properties. The effect of various …
high pressure die casting to provide improved mechanical properties. The effect of various …
Ageless aluminum-cerium-based alloys in high-volume die casting for improved energy efficiency
Strong chemical reactions between Al and Ce lead to the formation of intermetallics with
exceptional thermal stability. The rapid formation of intermetallics directly from the liquid …
exceptional thermal stability. The rapid formation of intermetallics directly from the liquid …