The rising cost of energy and concerns about the environmental impact of manufacturing
processes have necessitated the need for more efficient and sustainable manufacturing. The …

The power generated by the designed piezoelectric energy harvester replaces the standby
power that is constantly used in sensors and driving circuits in commercial LED shoes; the …

Nanostructured amorphous composites are novel materials comprising nano-sized crystal
phases embedded in an amorphous matrix, but often necessitating ultra-high-pressure …

It is costly to synthesize cathode materials through the solid reaction of raw materials at
relatively high temperatures due to its high energy consumption. Here, we use LiCoO 2 as a …

Abstract The dense ZnO-Bi 2 O 3-MnO 2 (ZBM) varistors were prepared by flash sintering
under electric fields ranging from 200 V/cm to 400 V/cm at constant heating rate (CHR) and …

Abstract Dense Na 0.5 K 0.5 NbO 3 ceramics are successfully produced by reactive flash
sintering of the NaNbO 3-KNbO 3 mixed powders, which enables the chemical reaction and …

Abstract Preparation of Gd 2 Zr 2 O 7 nanoceramics using a simple and low energy-
consuming approach is significant for their wide range of applications. In this work, flash …

Flash sintering of Sm 2 O 3 doped CeO 2 ceramics can be triggered at 25° C due to the
presence of graphite. The current density rise non-linearly to a set limit value in the voltage …

In situ X‐ray diffraction measurements at the Advanced Photon Source show that α‐Al2O3
and MgAl2O4 react nearly instantaneously and completely, and nearly completely to form …

High-performance alumina-zirconia ceramics are generally sintered above 1500° C and
consume lots of energy; rapid sintering at low temperature is an ideal technique due to its …