Titanium alloys are widely used in many domains due to their excellent high specific
strength and corrosion resistance. Stress plays a very important role in the application of …

Laser-clad AlCrFeCoNi high entropy alloy (HEA) coatings, produced on the surface of AISI
316 L stainless steel, were pack-borided at 1000° C for 4 h in open air, high-purity Ar and …

Due to the distinct surface coating properties of IN-718 nickel-based alloy after boriding and
aluminizing treatments, a comparative study was conducted. Optimal process parameters for …

TiB 2 and TiB double layers were formed on surface of Ti-6Al-4V by a diffusional process at
850 ͦ C for 4–16 h. EIS and XPS analyses revealed that formation of a passive film on the …

Diamond particles-reinforced Ni-based composite coating was fabricated on Ti6Al4V by
vacuum cladding. The microstructure, phase composition, hardness, dynamic impact and …

Present work deals with fabrication of superhard titanium boride coating on titanium surface
with preplaced amorphous boron layer using high power diode laser alloying. Amorphous …

Abstract The boriding of 4Cr5MoSiV1 steel was performed in the temperature range of 860°
C–980° C to examine the influence of boriding conditions on the boride layers. The …

In this study, boroaluminizing treatment was applied to obtain coatings on Inconel 718 nickel-
based alloy. The microstructure of these coatings was characterized using scanning electron …

The boride layer was prepared on the surface of Ti–5Al–2.5 Sn alloy by powder-pack
borided at 975–1075° C for 20 h with a temperature interval of 25° C, and surface …

In this work, the corrosion behaviors and mechanisms of the pure titanium by pack
boronizing with different Nd 2 O 3 contents in 3.5 wt% NaCl and 5.0 vol% H 2 SO 4 solutions …