Hot working, as an important group of post-processing routes for additive manufacturing
technology (3D printing), is used to reduce the solidification/processing defects and …

The evolution of the new microstructures produced by two types of dynamic recrystallization
is reviewed, including those brought about by severe plastic deformation (SPD). The …

In constant strain rate tests, the occurrence of dynamic recrystallization (DRX) is traditionally
identified from the presence of stress peaks in flow curves. However, not all materials …

The microstructural evolution of a 304 H austenitic stainless steel subjected to hot
compression was studied by the electron backscattered diffraction (EBSD) technique …

In order to improve the understanding of the dynamic and post-dynamic recrystallization
behaviours of AISI 304 austenitic stainless steel, a series of hot torsion test have been …

Microalloyed steels have evolved in terms of their chemical composition, processing, and
metallurgical characteristics since the beginning of the 20th century in the function of …

The dynamic transformation of austenite to ferrite at temperatures above the Ae 3
temperature was first investigated by Yada and co-workers in the late 1980s. This …

The classical kinetics models of dynamic recrystallization (DRX) in the form of Avrami
function describe the development of DRX process to a large extent; however, because of …

The hot deformation behavior of AISI 304L stainless steel with a wide range of initial grain
size was studied using hot compression tests corresponding to the temperature range of 900 …

The meanflow stresses developed duringthe hot strip rolling of ninegrades of Nbsteel have
been examined. For this purpose, Iog dataobtained from fourdifferent strip mills were …