Based on the need to fabricate new or modified materials that possess demanding
mechanical and wear properties that are needed for operation in extreme environmental …

The present study used mechanical milling and Spark Plasma Sintering (SPS) techniques to
synthesize the sintered Fe-Mo-Si alloys from ferromolybdenum and ferrosilicon lumps. Three …

Mechanical properties of grade 1 commercially pure titanium (CP–Ti) are characterized by a
good combination of strength and ductility at elevated temperatures. CP-Ti mechanical …

In this study, effect of mechanical milling on the mechanical, dry sliding wear and impact
response of spark plasma sintered Ni-17Cr6. 5Co1. 2Mo6Al4W7. 6Ta superalloy has been …

An investigation was carried out to evaluate the isothermal oxidation behavior of nickel
based superalloys at 1100° C for 120 h. The alloys which were microstructured and …

This study investigates the influence of molybdenum and niobium on the corrosion
characteristics of spark plasma-sintered cobalt–chromium (Co–Cr) in Hank's solution for …

Sintered compacts without further heat treatment were fabricated at 540° C, 570° C, 600° C
and 650° C (below the melting temperature of aluminium) via spark plasma sintering (SPS) …

In this paper, the effect of heating rate was investigated on the densification and mechanical
properties of Ni–19at% Cr binary alloy developed by spark plasma sintering technique. The …

Sintering temperature is essential towards attaining desired densification and formation of
phases which in turn influences the microstructure and properties of a material. In this study …

Titanium is used extensively in various engineering applications as a result of its unique
physical, chemical and mechanical properties. However, the difficulty encountered in …