Fe‐Based Amorphous Alloy Coatings: A Review
RZ Noorbakhsh, F Ostovan… - Advanced Engineering …, 2024 - Wiley Online Library
Fe‐based amorphous alloy coatings (Fe‐AACs) have exhibited appropriate corrosion and
wear resistance and improved the performance of material surfaces. This study summarizes …
wear resistance and improved the performance of material surfaces. This study summarizes …
Effect mechanism of diamagnetism element Cu in-situ alloying on the microstructure and magnetic properties of SLM-formed NiFeMo alloy
F **ong, J Yang, D Guo, W Liu, Z Fu, F Yang, R Li… - Materials …, 2025 - Elsevier
NiFeMo alloy formed using additive manufacturing techniques with high saturation magnetic
induction (BS) and low coercivity (HC) are crucial in aerospace applications. In this study …
induction (BS) and low coercivity (HC) are crucial in aerospace applications. In this study …
Solidification Behavior of Undercooled Fe75B25 Alloy
C Ma, L Yang, J Li - Metals, 2023 - mdpi.com
The paper presents a study of the phase selection and microstructure evolution of Fe75B25
alloy subjected to solidification at various undercoolings. The alloy invariably solidifies into a …
alloy subjected to solidification at various undercoolings. The alloy invariably solidifies into a …
Role of Cr Element in Highly Dense Passivation of Fe-Based Amorphous Alloy
Z Song, Z Wang, Q Chen, Z Qi, KB Kim, W Wang - Materials, 2023 - mdpi.com
The effect of the Cr element on the corrosion behavior of as-spun Fe72− x Cr x B19. 2Si4.
8Nb4 ribbons with x= 0, 7.2, 21.6, and 36 in 3.5% NaCl solution were investigated in this …
8Nb4 ribbons with x= 0, 7.2, 21.6, and 36 in 3.5% NaCl solution were investigated in this …
Effect of Boron Additions on the Microstructural Evolution and Properties of Fe-Mo-Cu-Ni-C Sintered Steel
Z Liu, Y Wang, Y Yuan, F Luo, T Wang, W Han, L Tan - Materials, 2023 - mdpi.com
The effects of different boron (B) additions from 0 to 0.5 wt.% on the microstructure and
properties of Fe-Mo-Cu-Ni-x BC powder metallurgy (PM) steels were investigated in this …
properties of Fe-Mo-Cu-Ni-x BC powder metallurgy (PM) steels were investigated in this …
Effect of the Molybdenum Content on Wear and Corrosion Behavior of Fe-B-Based Surface-Alloyed Layer
E Kocaman - Coatings, 2023 - mdpi.com
In this study, Fe-Mo-B-based hardfacing electrodes containing different amounts of Mo were
coated on an AISI 1020 steel substrate using the electric arc welding method. The findings …
coated on an AISI 1020 steel substrate using the electric arc welding method. The findings …
Molecular Dynamics Research on Fe Precipitation Behavior of Cu95Fe5 Alloys during Rapid Cooling
X Wang, X Gao, Z Lai, Z Han, Y Li - Metals, 2024 - mdpi.com
To investigate structural changes, the Cu95Fe5 alloy system was subjected to cooling rates
of 1× 1013 K/s, 2× 1012 K/s, 2× 1011 K/s, and 2× 1010 K/s using the molecular dynamics …
of 1× 1013 K/s, 2× 1012 K/s, 2× 1011 K/s, and 2× 1010 K/s using the molecular dynamics …
Cu-Fe 合金凝固过程中结构变化研究.
王旭锋， 张真豪， 高绪锋， 金雅璇… - Journal of Atomic & …, 2025 - search.ebscohost.com
采用分子动力学模拟方法研究了cu100 r X FeX (X= 1%, 3%, 5%) 合金在冷却速率为2 x 1010
K/s 条件下合金凝固过程. 研究表明, Fe 含量为1% 时, 随着合金温度的降低Fe …
K/s 条件下合金凝固过程. 研究表明, Fe 含量为1% 时, 随着合金温度的降低Fe …