Wood I-joists with web holes and flange notches: A literature review
G Chen, C Tan, W Yang, J Wu, T Zhou, H Jiang… - Journal of Building …, 2021 - Elsevier
Wood I-joists are increasing being used as floor and roof joists in the construction of
commercial and residential buildings, due to their light weight, high strength, easy handing …
commercial and residential buildings, due to their light weight, high strength, easy handing …
Glued-laminated timber from northern hardwoods: Effect of finger-joint profile on lamellae tensile strength
Because of their availability, mechanical properties and distinctive appearance, there is a
growing interest for the use of hardwood species in structural products such as glued …
growing interest for the use of hardwood species in structural products such as glued …
Effect of ACQ treatment on surface quality and bonding performance of four Malaysian hardwoods and cross laminated timber (CLT)
The objective of this study is to determine the effects of alkaline copper quaternary (ACQ)
treatment on the surface quality and bonding performance of four Malaysian hardwood …
treatment on the surface quality and bonding performance of four Malaysian hardwood …
[HTML][HTML] Feasibility of portable NIR spectrometer for quality assurance in glue-laminated timber production
The feasibility of a portable NIR sensor for off-line determination of diverse wood quality
aspects relevant in the production of glue-laminated timber was demonstrated. The best …
aspects relevant in the production of glue-laminated timber was demonstrated. The best …
[PDF][PDF] Evaluation of Mechanical Properties and Surface Quality of Wood from Bosnia and Herzegovina Exposed to Outdoor Conditions.
This study investigated the mechanical properties of beech (Fagus sylvatica L.) and fir
(Abies alba) wood from Bosnia and Herzegovina under outdoor exposure. Samples were …
(Abies alba) wood from Bosnia and Herzegovina under outdoor exposure. Samples were …
Cross-laminated timber: Perspectives from a bibliometric analysis (2006–2018)
ABSTRACT A bibliometric analysis of the Scopus database was performed to identify
research trends related to cross-laminated timber (CLT) from 2006, when the earliest …
research trends related to cross-laminated timber (CLT) from 2006, when the earliest …
The adhesion performance in green-glued finger joints using different wood ring orientations
Structural lumber is designed to meet the technical standards that ensure safety, cost-
effectiveness, and sustainability. However, some tree species face limitations in their growth …
effectiveness, and sustainability. However, some tree species face limitations in their growth …
Mechanical Performance and Bond Integrity of Finger Jointed High-Density Sub-Tropical Hardwoods for Residential Decking
Finger jointing has long been a method of extending the longitudinal span of short-length
timber pieces through a tooth-like profile of a nominated length and bonded with adhesive …
timber pieces through a tooth-like profile of a nominated length and bonded with adhesive …
Mechanical properties of Glued-laminated timber made up of mixed tropical wood species
This paper deals with an innovative experimental study performed on glued-laminated
timber (GLT) beams, machined and made with three tropical hardwood species. Defect-free …
timber (GLT) beams, machined and made with three tropical hardwood species. Defect-free …
Possibility to Use Short Sawn Timber in the Production of Glued Laminated Beams
D Dziurka, M Kuliński, A Trociński, R Mirski - Materials, 2022 - mdpi.com
Numerous studies have shown that the geometry of micro-joints significantly affects the
strength of the so joined timber element. The bending strength increases by creating a larger …
strength of the so joined timber element. The bending strength increases by creating a larger …