Large‐area spallation and crack formation during service are big problems of plasma‐
sprayed thermal barrier coatings (TBCs), owing to their weak bond strengths and high …

Abstract Machine learning (ML) methods have gained widespread attention in optimizing
nanostructures for target transport properties and discovering unexpected physics. Here, an …

Carbon Nanotubes (CNT) reinforced Cr3C2–20NiCr composite coatings were prepared and
deposited on alloy steel using high-velocity oxyfuel (HVOF) thermal spraying method. The …

Sintering is one of the major failure mechanisms of air-plasma-sprayed thermal barrier
coating system (APS TBCs) during high temperature service. For better sintering resistance …

The exploitation process of gas turbines features various damage to their elements with
various effects on their usability. The overheating of the blade material, especially of …

Thermal barrier coatings (TBC) are the system build from ceramic insulation top-coat with
internal bond-coat as an interlayer between ceramic and Ni-based superalloys substrate …

The objective of this work is to apply the method of variation of parameters to various direct
and inverse nonlinear, multimode heat transfer problems. An overview of the general …

The problem of the formation and estimation of a thermoradiant and temperature field in
ceramics Thermal-Environmental-Barrier Coatings (TBC/EBC) has been considered with …

Ceramics are used for thermal barrier coatings (TBCs) for turbine parts. Better TBCs will
allow gas turbines to operate at higher gas temperatures. Any further increase in the turbine …

Various types of damages to gas-turbine components, in particular to turbine blades, may
occur in the course of gas turbine operation. The paper has been intended to discuss …