Directed energy deposition of metals: processing, microstructures, and mechanical properties
Amongst the many additive manufacturing (AM) techniques, directed energy deposition
(DED) is a prominent one, which can also be used for the repair of damaged components. In …
(DED) is a prominent one, which can also be used for the repair of damaged components. In …
Molten salts in the light of corrosion mitigation strategies and embedded with nanoparticles to enhance the thermophysical properties for CSP plants
Solar power has prominently been showing potential as a means to sustainable,
dispatchable and affordable source of energy while attracting huge attention for scientists as …
dispatchable and affordable source of energy while attracting huge attention for scientists as …
Corrosion behaviour of 316 stainless steel in NaCl-KCl-MgCl2 salt vapour at 700° C
Q Liu, H Xu, H Yin, N Li, W Wang, L Li, Z Tang, Y Qian - Corrosion Science, 2022 - Elsevier
The corrosion behaviour of 316 stainless steel in NaCl-KCl-MgCl 2 salt vapour at 700° C
under static conditions was investigated in this experiment. Easy-to-peel oxide layers were …
under static conditions was investigated in this experiment. Easy-to-peel oxide layers were …
Effect of thermal aging on corrosion behavior of type 316H stainless steel in molten chloride salt
The effect of long-time thermal aging on corrosion behavior of type 316H stainless steel in
molten chloride salt was studied. The results showed the long-time aging at 700° C …
molten chloride salt was studied. The results showed the long-time aging at 700° C …
[HTML][HTML] Review on sodium corrosion evolution of nuclear-grade 316 stainless steel for sodium-cooled fast reactor applications
Y Dai, X Zheng, P Ding - Nuclear Engineering and Technology, 2021 - Elsevier
Sodium-cooled fast reactor (SFR) is the preferred technology of the generation-IV fast
neutron reactor, and its core body mainly uses nuclear-grade 316 stainless steel. In order to …
neutron reactor, and its core body mainly uses nuclear-grade 316 stainless steel. In order to …
Galvanic corrosion of type 316L stainless steel and graphite in molten fluoride salt
The effect of Graphite on the corrosion of Type 316L stainless steel (SS) was investigated in
molten FLiNaK (LiF-NaF-KF: 46.5− 11.5− 42 mol.%) salt using electrochemical methods …
molten FLiNaK (LiF-NaF-KF: 46.5− 11.5− 42 mol.%) salt using electrochemical methods …
An In Situ, multi-electrode electrochemical method to assess the open circuit potential corrosion of Cr in unpurified molten FLiNaK
An in situ electrochemical method to investigate the time-dependent spontaneous corrosion
of pure Cr in an unpurified LiF-NaF-KF eutectic salt at 600° C was developed. A multi …
of pure Cr in an unpurified LiF-NaF-KF eutectic salt at 600° C was developed. A multi …
Progress in-situ synthesis of graphitic carbon nanoparticles with physical vapour deposition
Graphitic carbon nanoparticles are in high demand for sensing, health care, and
manufacturing industries. Physical vapour deposition (PVD) methods are advantageous for …
manufacturing industries. Physical vapour deposition (PVD) methods are advantageous for …
The corrosion behavior of 304 stainless steel in NaNO 3–NaCl–NaF molten salt and vapor
X Lai, H Yin, P Li, B Liu, L Gao, Z Tang - RSC advances, 2022 - pubs.rsc.org
Corrosion behavior of 304 stainless steel in molten NaNO3–NaCl–NaF salt and NaNO3–
NaCl–NaF vapor has been studied at 450° C. The results showed that the samples suffered …
NaCl–NaF vapor has been studied at 450° C. The results showed that the samples suffered …
Assessing the viability of chromium (II) as a corrosion inhibitor for 316H stainless steel in NaF-BeF2 molten salt
Y Zuo, W Peng, H Peng, W Huang, Y Gong - Journal of Electroanalytical …, 2024 - Elsevier
The redox behavior of Cr (II)/Cr (III) and Cr (II)/Cr in an 873 K NaF-BeF 2 (FNaBe) melt are
electrochemically investigated using cyclic voltammetry (CV), square wave voltammetry …
electrochemically investigated using cyclic voltammetry (CV), square wave voltammetry …