Progress in 2D materials based Nanolubricants: A review
The growing worldwide population necessitates an urgent need and demand for efficient
and sustainable energy use, particularly in the moving components of machinery. A …
and sustainable energy use, particularly in the moving components of machinery. A …
The influence of the H/E ratio on wear resistance of coating systems–Insights from small-scale testing
BD Beake - Surface and coatings technology, 2022 - Elsevier
The limit of applicability of the correlation between the ratio of hardness to elastic modulus
(H/E) of coating systems and their wear resistance has been explored. Experimental …
(H/E) of coating systems and their wear resistance has been explored. Experimental …
Design aspects of additive manufacturing at microscale: A review
Additive manufacturing (AM) technology has been researched and developed for almost
three decades. Microscale AM is one of the fastest-growing fields of research within the AM …
three decades. Microscale AM is one of the fastest-growing fields of research within the AM …
Tribological and corrosion behavior of high pressure cold sprayed duplex 316 L stainless steel
In this work, the wear and corrosion behavior of high-pressure cold-sprayed (CS) 316 L
stainless-steel (SS) was investigated and compared with traditional 316 L SS for …
stainless-steel (SS) was investigated and compared with traditional 316 L SS for …
Influence of Si-and W-do** on micro-scale reciprocating wear and impact performance of DLC coatings on hardened steel
Reciprocating micro-scale sliding tests and micro-scale repetitive impact tests were
performed with diamond probes on un-doped, Si-doped and W-doped diamond-like carbon …
performed with diamond probes on un-doped, Si-doped and W-doped diamond-like carbon …
[HTML][HTML] Investigating the relationship of hardness and flow stress in metal forming
Hardness is routinely utilised to link the bulk material properties to surface contact
mechanics. Besides possible differences in the material properties between bulk and …
mechanics. Besides possible differences in the material properties between bulk and …
Stress-induced, debris-modulated friction and wear resistance performance of nanostructured Ni–Co coatings
Owing to their HCP structure and inherent resistance to deformation, Cobalt-containing
alloys are often used for low-friction and wear-resistant purposes. Here, the tribological …
alloys are often used for low-friction and wear-resistant purposes. Here, the tribological …
Super-slippery degraded black phosphorus/silicon dioxide interface
The interfaces between two-dimensional (2D) materials and the silicon dioxide
(SiO2)/silicon (Si) substrate, generally considered as a solid–solid mechanical contact, have …
(SiO2)/silicon (Si) substrate, generally considered as a solid–solid mechanical contact, have …
Simultaneous control of sliding contact and oxidation via graphene-based materials
Friction and wear, which originate as a consequence of contact sliding, remain critical
concerns. In many systems, friction causes 20–30% wastage of energy, while wear leads to …
concerns. In many systems, friction causes 20–30% wastage of energy, while wear leads to …
Effect of gas propellant temperature on the microstructure, friction, and wear resistance of high-pressure cold sprayed Zr702 coatings on Al6061 alloy
For the first time, Zr702 coatings were deposited onto an Al6061 alloy using a high-pressure
cold spray (HPCS) system. In this work, five different N2 process gas temperatures between …
cold spray (HPCS) system. In this work, five different N2 process gas temperatures between …