Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell
The performance of low-to-intermediate temperature (400–800° C) solid oxide fuel cells
(SOFCs) depends on the properties of electrolyte used. SOFC performance can be …
(SOFCs) depends on the properties of electrolyte used. SOFC performance can be …
A review of X-ray photoelectron spectroscopy technique to analyze the stability and degradation mechanism of solid oxide fuel cell cathode materials
Nondestructive characterization of solid oxide fuel cell (SOFC) materials has drawn attention
owing to the advances in instrumentation that enable in situ characterization during high …
owing to the advances in instrumentation that enable in situ characterization during high …
Enhancing ORR activity and CO2 tolerance of Pr0. 4Sr0. 6Co0. 2Fe0. 8O3-δ-based SOFC cathode through synergistic do** and surface modification
B **a, H Zhang, C Yao, H Lou, M Chen, Z Zhang… - Applied Surface …, 2024 - Elsevier
The development of cathodes with high catalytic activity and stability remains a critical
challenge for the commercialization of solid oxide fuel cells (SOFCs). In this study, a novel …
challenge for the commercialization of solid oxide fuel cells (SOFCs). In this study, a novel …
[HTML][HTML] Enhanced electrochemical performance of partially amorphous La0. 6Sr0. 4CoO3-δ oxygen electrode materials for low-temperature solid oxide cells …
This work evaluates partially amorphous La 0.6 Sr 0.4 CoO 3-δ (LSC) as a potential oxygen
electrode for low-temperature solid oxide cells. LSC was deposited using the spin-coating …
electrode for low-temperature solid oxide cells. LSC was deposited using the spin-coating …
Electrical and electrochemical characteristics of La0.6Sr0.4CoO3-δ cathode materials synthesized by a modified citrate-EDTA sol-gel method assisted with activated …
The electrical conductivity and electrochemical performance of a La 0.6 Sr 0.4 CoO 3-δ
(LSC) cathode produced by a modified citrate-EDTA sol-gel method assisted with activated …
(LSC) cathode produced by a modified citrate-EDTA sol-gel method assisted with activated …
Formation of sol–gel derived (Cu, Mn, Co) 3O4 spinel and its electrical properties
Abstract An (Mn, Co) 3 O 4 spinel layer effectively suppresses Cr outward diffusion, but the
occurrence of spallation between coating and metal interfaces and the increasing oxidation …
occurrence of spallation between coating and metal interfaces and the increasing oxidation …
Optical, mechanical and electrical properties of LSCF–SDC composite cathode prepared by sol–gel assisted rotary evaporation technique
Abstract La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) is a perovskite-type oxide that exhibits
excellent mixed ionic–electronic conducting properties and is a suitable cathode material for …
excellent mixed ionic–electronic conducting properties and is a suitable cathode material for …
Synthesis of (Cu,Mn,Co)3O4 Spinel: Effects of Citrate-to-Nitrate Ratio on Its Homogeneity and Electrical Properties
The (Cu, Mn, Co) 3O4 (CMC) spinel layer is useful in inhibiting Cr vaporization that
deteriorates the solid oxide fuel cell performance. The effectiveness of the spinel layer in …
deteriorates the solid oxide fuel cell performance. The effectiveness of the spinel layer in …
A Short Review on the Proton ConductingElectrolytes for Solid Oxide Fuel Cell Applications
The performance of solid oxide fuel cells (SOFCs) mostly relies on the electrolyte
component, which is considered the heart of the SOFC. Since intermediate-temperature …
component, which is considered the heart of the SOFC. Since intermediate-temperature …
[HTML][HTML] Physicochemical Properties of (La,Sr)CoO3 Thick Films on Fe-25Cr Steel under Exposure to SOFC Cathode Operating Conditions
La0. 6Sr0. 4CoO3 (LSC) coatings with a thickness of 50–100 µm were deposited on Fe-
25Cr ferritic stainless steel (DIN 50049) via screen printing. The required suspension had …
25Cr ferritic stainless steel (DIN 50049) via screen printing. The required suspension had …