A flexible plate vertically clamped at the free-end leading edge was used to modulate the
aerodynamic forces on a wall-mounted finite square cylinder. The side width (d) of the …

As a follow-up study of Wang et al.[“Control of the flow around a finite square cylinder with a
flexible plate attached at the free end,” Phys. Fluids 34 (2), 027109 (2022)], this paper …

To control the aerodynamic forces and near wake of a 3D wall-mounted square cylinder with
an aspect ratio H/d= 5, pulsing slot suction is employed at its free-end leading edge. The …

Large-span cantilevered roof represents a unique type of structure that is vulnerable to wind
loads. Inspired by the need to maximumly reducing the rooftop wind loads, this study …

Bluff bodies are ubiquitous in nature and engineering applications, such as bridges,
buildings, and marine structures, to name a few. Fluid flow around these bluff bodies can …

The flow separation during the process of flows around elliptical cylinders causes unsteady
vortex shedding in the wake, which leads to the vortex-induced vibration of structures that …

通过风洞实验研究了高宽比H/d= 5 的**方形棱柱顶部柔性薄膜颤振对柱体气动力特性的影响
规律. 模型宽度为40 mm, 来流风速4~ 20 m/s, 对应Reynolds 数为10 960~ 54 800 …