Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
A subthreshold voltage reference with scalable output voltage for low-power IoT systems
This paper presents a subthreshold voltage reference in which the output voltage is scalable
depending on the number of stacked PMOS transistors. A key advantage is that its output …
depending on the number of stacked PMOS transistors. A key advantage is that its output …
A 10 mV-Input Boost Converter With Inductor Peak Current Control and Zero Detection for Thermoelectric and Solar Energy Harvesting With 220 mV Cold-Start and …
A boost converter for thermoelectric energy harvesting in 130 nm CMOS achieves energy
harvesting from a 10 mV input, which allows wearable body sensors to continue operation …
harvesting from a 10 mV input, which allows wearable body sensors to continue operation …
A 192-pW Voltage Reference Generating Bandgap– With Process and Temperature Dependence Compensation
This article presents a methodology to design a circuit to compensate for process skew by
exploiting an inherent dimension-dependent effect of process skew on change in the …
exploiting an inherent dimension-dependent effect of process skew on change in the …
26.8 A 236nW− 56.5 dBm-sensitivity bluetooth low-energy wakeup receiver with energy harvesting in 65nm CMOS
Batteryless operation and ultra-low-power (ULP) wireless communication will be two key
enabling technologies as the IC industry races to keep pace with the IoE projections of 1T …
enabling technologies as the IC industry races to keep pace with the IoE projections of 1T …
5.8 A 9.3 nW all-in-one bandgap voltage and current reference circuit
Ultra-low-power (ULP) sensor technologies for the future internet of things have presented
challenges in ULP implementation of reference circuits while kee** traditional …
challenges in ULP implementation of reference circuits while kee** traditional …
Trimming-less voltage reference for highly uncertain harvesting down to 0.25 V, 5.4 pW
This article introduces a compact NMOS-only voltage reference that is able to operate down
to a 0.25-V supply voltage and 5.4-pW power consumption. This allows reliable generation …
to a 0.25-V supply voltage and 5.4-pW power consumption. This allows reliable generation …
A 6.45 Self-Powered SoC With Integrated Energy-Harvesting Power Management and ULP Asymmetric Radios for Portable Biomedical Systems
This paper presents a batteryless system-on-chip (SoC) that operates off energy harvested
from indoor solar cells and/or thermoelectric generators (TEGs) on the body. Fabricated in a …
from indoor solar cells and/or thermoelectric generators (TEGs) on the body. Fabricated in a …
A single BJT bandgap reference with frequency compensation exploiting mirror pole
In this article, we propose a bandgap reference (BGR) with a single bipolar junction
transistor (BJT) branch and a proportional-to-absolute-temperature (PTAT)-embedded …
transistor (BJT) branch and a proportional-to-absolute-temperature (PTAT)-embedded …
A 5.6 ppm/° C temperature coefficient, 87-dB PSRR, sub-1-V voltage reference in 65-nm CMOS exploiting the zero-temperature-coefficient point
This paper describes an MOSFET-only voltage reference realized in 65-nm CMOS featuring
a temperature coefficient (TC) of 5.6 ppm/° C from-40° C to 125° C, a power supply rejection …
a temperature coefficient (TC) of 5.6 ppm/° C from-40° C to 125° C, a power supply rejection …
A 1.8-nW,− 73.5-dB PSRR, 0.2-ms startup time, CMOS voltage reference with self-biased feedback and capacitively coupled schemes
CZ Shao, SC Kuo, YT Liao - IEEE Journal of Solid-State …, 2020 - ieeexplore.ieee.org
This article presents a nanowatt CMOS voltage reference using self-biased and capacitively
coupled schemes for improving the power supply rejection ratio (PSRR) and settling time …
coupled schemes for improving the power supply rejection ratio (PSRR) and settling time …