Fabrication of titanium-based alloys with bioactive surface oxide layer as biomedical implants: Opportunity and challenges
MRSN Hazwani, LX Lim, Z Lockman… - … of Nonferrous Metals …, 2022 - Elsevier
Titanium and its alloys have long been used as implant materials due to their outstanding
mechanical properties and apparent biocompatibility. Despite this, the search for better …
mechanical properties and apparent biocompatibility. Despite this, the search for better …
[HTML][HTML] Investigating the effect of milling time on structural, mechanical and tribological properties of a nanostructured hiped alpha alumina for biomaterial …
In this work was prepared α-Al 2 O 3 alloys from laboratory aluminum oxide powder that was
milled for different periods of time and sintered at a temperature of 1450° C. The difference …
milled for different periods of time and sintered at a temperature of 1450° C. The difference …
[HTML][HTML] Structural, and tribological properties of nanostructured α+ β type titanium alloys for total hip
Titanium alloys are in demand for various biomedical applications and the most popular
among them being, Ti–6Al–4V. Hence, in this study, Ti–6Al–7Nb are fabricated through the …
among them being, Ti–6Al–4V. Hence, in this study, Ti–6Al–7Nb are fabricated through the …
Friction and wear behaviors of a high nitrogen austenitic stainless steel Fe-19Cr-15Mn-0.66 N
The friction and wear behaviors of a Fe-19Cr-15Mn-0.66 N high nitrogen austenitic stainless
steel (HNSS) were investigated. Tribology experiments were carried out under different …
steel (HNSS) were investigated. Tribology experiments were carried out under different …
[HTML][HTML] Structural, tribological and antibacterial properties of (α+ β) based ti-alloys for biomedical applications
Implant-related follow up complications resulting from poor implant integration,
delamination, chip**, mechanical instability, inflammation or graft-vs-host reaction may …
delamination, chip**, mechanical instability, inflammation or graft-vs-host reaction may …
Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed β-Type Titanium Alloys for Orthopedic Applications
Aiming to develop alloys with better properties for orthopedic applications, the focus of the
present research was to evaluate the effect of Mo at.% content on structural, mechanical …
present research was to evaluate the effect of Mo at.% content on structural, mechanical …
Preliminary investigation on the bio-tribocorrosion behavior of porous nanostructured β-type titanium based biomedical alloys
The bio-tribocorrosion behavior of newly developed near β-types Ti-15Nb and Ti-15Mo
alloys was investigated in Phosphate-Buffered Saline (PBS) under different loads. Open …
alloys was investigated in Phosphate-Buffered Saline (PBS) under different loads. Open …
Study of optical properties of surface layers produced by laser surface melting and laser surface nitriding of titanium alloy
A Lisiecki - Materials, 2019 - mdpi.com
This study measured optical properties, such as specular, diffuse, and total reflection for 808
nm wavelength, characteristic for high power diode lasers radiation, from the surface of …
nm wavelength, characteristic for high power diode lasers radiation, from the surface of …
The effect of milling time on the microstructure and mechanical properties of Ti-6Al-4Fe alloys
Replacement of toxic and expensive vanadium (V) in medical grade titanium alloys with
cheaper and non-toxic elements such as iron (Fe) or niobium (Nb), is an important step …
cheaper and non-toxic elements such as iron (Fe) or niobium (Nb), is an important step …
Effect of sintering temperature on structure and tribological properties of nanostructured Ti–15Mo alloy for biomedical applications
The effect of sintering temperature (1073–1373 K) on the structural and tribological
properties of nanostructured ball-milled β-type Ti–15Mo samples was investigated. The …
properties of nanostructured ball-milled β-type Ti–15Mo samples was investigated. The …