For predicting the strain rate dependent failure of short fiber reinforced plastics (SFRP) a two-
phase simulation model is developed using the finite element method and comparing the …

Time‐dependent variable stresses that occur in composites subjected to mechanical and
dynamic loads have devastating impacts on the material properties. Since these stresses …

Hydraulic cylinders can reach enormous sizes depending on the working pressure and
application areas. These structures, which are typically fabricated using traditional steels …

In the current study, Composite Overwrapped Pressure Vessels (COPVs) with various
geodesic dome profiles have been built and their modal and random vibration responses …

Thirty-six flax fibre-reinforced epoxy (FFRE) plates with two, three, and four fabric layers and
lengths ranging from 160 mm to 270 mm and nine FFRE tubes with a diameter of 60 mm, a …

Ausgangspunkt der Arbeit bildeten vorangegangene makroskopische und mikroskopische
experimentelle Untersuchungen an PP GF30. Diese zeigten zum einen, dass die …

High-strength steels are widely preferred in the design of equipment and vehicles used in
the defense industry, which are mostly exposed to random vibrations with supernormal …

This paper presents a robust method to estimate polymers' dam**, based on modal
identification methods on frequency functions. The proposed method presents great …

Bu çalışmada hidrolik silindirlerin ağırlığını azaltmak için geleneksel çelik malzemeler yerine
yüksek mukavemet/ağırlık oranı ile öne çıkan kompozit malzemelerin kullanılması …

The composite made in this research consists of three layer. The upper and lower layers are
composite and intermediate layer is polyurethane rubber. The upper and lower layers are …