Components working under harsh environments in power generation, marine, and
aerospace sectors are subjected to severe surface degradation because of wear, corrosion …

Traditional steels and alloys face challenges in resisting high-temperature oxidation and
corrosion, especially as boilers are operated at elevated temperatures. This issue has …

Currently, the service temperature of the MCrAlX coating (M= Ni, Co, or NiCo; X= minor
elements such as Y, Ce, Si, Ta) either as an overlay or as a bondcoat in some critical …

In high-temperature boiler operations, conventional steels and alloys grapple with the
formidable challenges posed by oxidation and corrosion. Prolonged exposure to extreme …

High velocity oxy-fuel (HVOF) thermal spray process has shown obvious advantages over
other surface hardening techniques when depositing WC-based layers, such as the laser …

The effect of heat treatment (300–950° C) on friction and abrasive wear behaviour of WC-
12Co and Cr 3 C 2–25NiCr coatings was investigated in the present work. The abrasive …

The high velocity oxy-fuel (HVOF) spraying process has been employed for applying
engineering coatings on various industrial parts and components. Recently, post-spray …

In this study, the as-received and nano-scaled oxide dispersion strengthened (ODS) MCrAlY
coatings were deposited using high-velocity oxy-fuel (HVOF) spraying process. The high …

In this study, the as-received (AR) and nanoceria-doped (NCD) AlCrFeCoNi high-entropy
alloy (HEA) coatings have been applied by the thermal spraying process. In this case, 0.5 …

This work reports a morphological, mechanical, and corrosion resistance characterization of
WC-12Co and WC-25Co coatings deposited by cold gas spray (CGS) onto AA 7075-T6 …