Recent progress and technical challenges in using calcium sulfoaluminate (CSA) cement
Calcium sulfoaluminate (CSA) cement can be used as a replacement for Portland cement to
reduce CO 2 emissions. However, the performance of CSA cement remains unknown with …
reduce CO 2 emissions. However, the performance of CSA cement remains unknown with …
Treatment of municipal solid waste incineration fly ash: State-of-the-art technologies and future perspectives
Municipal solid waste incineration (MSWI) fly ash is considered as a hazardous waste that
requires specific treatment before disposal. The principal treatments encompass thermal …
requires specific treatment before disposal. The principal treatments encompass thermal …
Pathways towards sustainable concrete
D Coffetti, E Crotti, G Gazzaniga, M Carrara… - Cement and Concrete …, 2022 - Elsevier
This paper covers a wide range of alternative strategies to improve the sustainability of
concrete. It firstly considers the relatively easy application of the latest technologies to …
concrete. It firstly considers the relatively easy application of the latest technologies to …
Research review of cement clinker chemistry
HM Ludwig, W Zhang - Cement and Concrete Research, 2015 - Elsevier
This paper aims to review the progress in cement clinker chemistry since the last
International Conference on the Chemistry of Cement in 2011. Although Portland cement …
International Conference on the Chemistry of Cement in 2011. Although Portland cement …
A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing
A major flaw of 3D concrete printing (3DCP) is its weak interlayer bonding. Consequently
mechanical, bond behaviors and durability are compromised. The shrinkage because of …
mechanical, bond behaviors and durability are compromised. The shrinkage because of …
[HTML][HTML] Utilization of steel slag for cemented tailings backfill: Hydration, strength, pore structure, and cost analysis
B **ao, Z Wen, S Miao, Q Gao - Case Studies in Construction Materials, 2021 - Elsevier
High-value utilization of steel slag in cement is limited due to its low reactivity, volume
instability, and restrictions in the construction industry. In this study, a novel steel slag binder …
instability, and restrictions in the construction industry. In this study, a novel steel slag binder …
A new perspective on Belite-ye'elimite-ferrite cement manufactured from electrolytic manganese residue: Production, properties, and environmental analysis
In this research, the electrolytic manganese residue (EMR) based belite-ye'elimite-ferrite (E-
BYF) clinker composed of 51.6% belite, 25.6% iron phase, 15.8% ye'elimite and 6.5% over …
BYF) clinker composed of 51.6% belite, 25.6% iron phase, 15.8% ye'elimite and 6.5% over …
Advances in understanding ye'elimite-rich cements
In this review, we discuss the recent advances in understanding ye'elimite-rich cements.
These cements can be classified as follows:(1) Low belite ones namely called calcium …
These cements can be classified as follows:(1) Low belite ones namely called calcium …
Carbonation of calcium sulfoaluminate mortars
This study investigated potential physical and chemical parameters that could govern the
carbonation rate of calcium sulfoaluminate (CSA) mortars and endeavored to elucidate the …
carbonation rate of calcium sulfoaluminate (CSA) mortars and endeavored to elucidate the …
Cement-based ductile rapid repair material modified with self-emulsifying waterborne epoxy
Ordinary silicate cement repair materials are slow to set and harden, have low early
strength, and cannot meet the demands of rapid repair, and the disadvantage of brittleness …
strength, and cannot meet the demands of rapid repair, and the disadvantage of brittleness …