Consistent and reasonable characterization of the material behavior under the coupled
effects of strain, strain rate and temperature on the material flow stress is remarkably crucial …

This study conducted isothermal hot compression experiments on Incoloy825 superalloy,
spanning temperatures from 1000 to 1150° C, strain rates from 0.01 to 10 s− 1, and a true …

Aluminum–lithium alloys have been extensively used in the aviation and aerospace field.
Now it is one of the critical materials for the production of large aircraft in China …

A precise constitutive equation is essential to accurately describe the flow behavior of
aluminum alloy in numerical simulation of hot-forming process. In this study, the hot …

The hot deformation behavior of fine grained Inconel 718 superalloy was investigated by
compression test in the temperature range of 950 to 1150° C and strain rate range of 0.1–10 …

The hot compression tests for spray deposited alloy 2195 were performed on Gleeble-1500
thermomechanical simulator at different conditions. The constitutive models and processing …

Isothermal compression tests were carried out on TC17 alloys with different hydrogen
contents using a Gleeble-3800D thermal simulator with deformation temperatures ranging …

The isothermal hot compression tests of homogenized 6026 aluminum alloy under wide
range of deformation temperatures (673–823 K) and strain rates (0.001–10 s− 1) were …

The present work explored the impacts of temperature, strain rate, strain and initial
orientation on hot-compression behavior and microstructural evolvement of hot-extruded …

As an intelligent global optimization method, the genetic algorithm has tremendous potential
for improving flow behavior modeling and analysis. Based on flow stress-true strain curves …