Al 2 O 3 fibers are promising candidates for porous ceramics, but the sudden growth of
grains in the fibers above 1200° C will limit their applications for high temperature. Herein …

In this article, cobalt oxide (Co3O4) nanoparticles were prepared using chemical synthesis
(CS-Co3O4 NPs) and green synthesis (GS-Co3O4 NPs) processes, respectively, from …

Yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) have been widely applied in fixed
partial prostheses as well as dental uses ie a substructure for crowns. However, Y-TZP has …

High temperature application requires protection coatings to ensure the optimal operating
cycles to avoid the uncertainty caused by hot gases, foreign contaminates, ambient …

The sonochemical reaction approach was used to make NiGd x Fe 2-x O 4 nanoferrites (x=
0.01, 0.03, 0.05, 0.07, and 0.09). X-ray diffraction (XRD), ultra violet-diffuse reflectance …

In this study, a sonochemical reactor was used to synthesize Mn 1− x Cu x La 0.1 Fe 1.9 O 4
nanoferrites with different compositions of x (0.09, 0.18, 0.27, and 0.36). Mn 1− x Cu x La 0.1 …

Advanced ceramics printed with photon-based additive manufacturing deals with anisotropic
mechanical properties from the layer-by-layer manufacturing. Motivated by the success in …

An ultrahigh photosensitive diode was developed using a Cu-doped CeO2 thin film through
spray pyrolysis processing, which has made a unique contribution in the field of …

In this study, an effective sonochemical reactor was used to synthesize Mn0. 5Cu0. 5La x
Fe2− x O4 nanoferrites with different compositions of x= 0.03, 0.06, 0.09, and 0.12. Mn0 …

Abstract Fully-dense ZrB 2 and HfB 2 composites were elaborated by Spark Plasma
Sintering with 20 vol% AlN to replace SiC or TaSi 2 with the objective to improve the …